1. 31KCDVR.EXE Driver
2. README.TXT File Contents

README.TXT Driver File Contents (31KCDVR.EXE)

  CDR-3100 CD-ROM Device Driver (250-1098) 

This driver enables the user to use the CDR-3100 CD-ROM Drive with
an IBM PC, XT, AT, or compatible computer. Please note that the
computer must have TANDY MS-DOS version 3.30.00 or later.


This disk contains the following files--

   DD250.SYS     DD250XT.SYS   LICENSE.TXT   MSCDEX.EXE
   MSCDEX.TXT    SETUP.EXE     TCDP.EXE      USRGUIDE.TXT
   README.TXT


In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure your printer is switched on, is on line,
and at the C:\> prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.


INSTALLATION

1.  Follow the procedure described in the chapters titled
    PREPARING THE ADAPTER INTERFACE CARD, INSTALLING THE ADAPTER 
    INTERFACE CARD, and CONNECTING DATA AND POWER CABLES in the 
    Installation Guide in order to install the CD-ROM Drive.

2.  Start up your computer. Make sure that the C:\> prompt is displayed
    on the screen.

3.  Insert this disk in Drive A.

4.  Type

       A:

    and press <Enter>. The A:\> prompt should be displayed on the screen.

5.  Type

       SETUP

    and press <Enter>.

6.  Respond accordingly to the screen prompts.

    NOTE:
       *Select the default settings by pressing <Enter>. To change the
        default response (due to changes made on the adapter interface
        card), type in your choice at the prompt.

7.  Remove this disk from the drive and reboot the computer.



NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.