README.TXT Driver File Contents (PC-004_Driver.zip)

PCMCIA 10/100 Fast Ethernet + 56K Fax/Modem PC Card

                         DOS ODI Driver Overview

  Contents
  ÄÄÄÄÄÄÄÄ
       Introduction
       Getting Started
       Support Options
       Copyrights, Trademarks, and Disclaimers

  Introduction
  ÄÄÄÄÄÄÄÄÄÄÄÄ
       The LanModem NetWare driver programs provided in this diskette.
       For installation information for various systems, please refer to the
       appropriate text file listed below.  These files are included in this
       diskette.

       File                    Description
       ------------           -------------------------------------------
       DOSODI.TXT             NetWare DOS Client installation text file
       NWLITE.TXT             NetWare Lite installation text file
       PRSNLNW.TXT            Personal Netware installation text file
       PCNFS.TXT              Sun PCNFS 5.0 with ODI

  Getting Started
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
       This guide lists the available NET.CFG keywords for the ODI device
       drivers. Most of these keywords are optional and use respective
       default values.

       NET.CFG
       -------
       Protocol IPX
           Bind #1

       Link Driver LMODI
           INT 11
           PORT 320
       ;    frame Ethernet_802.3
           frame Ethernet_802.2
       ;   frame Ethernet_II
       ;   frame Ethernet_SNAP

       ;    Protocol IPX 00 Ethernet_802.3
           Protocol IPX E0 Ethernet_802.2
       ;   Protocol IPX 8137 Ethernet_II

       The hardware settings must match the PCMCIA driver layer provides.

       PORT  This keyword specifies the I/O base address used by
                 the adapter. This value must match the actual I/O base
                 address setting on the adapter.  If this keyword is not
                 specified, the default value will be put into effect.

       INT   This keyword specifies the interrupt line used by the
                 adapter.  This value must match the actual IRQ setting
                 on the adapter.  If this keyword is not specified, the
                 default value will be put into effect.

       FRAME This keyword specifies the supported frame types.  Four
                 types are available:

                ETHERNET_802.3, ETHERNET_802.2,
                ETHERNET_II and ETHERNET_SNAP.

       AUTOSENSE     - Auto detect the speed and duplex mode.

       100_Half      - User force the media to 100 Mbps and half duplex
                       mode.

       10_Full       - User force the media to 10 Mbps and full duplex
                       mode.

       10_Half       - User force the media to 10 Mbps and half duplex
                       mode.

  Support Options
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
        We are consistently improving and upgrading our drivers. you are
        welcomed at any time to browse through our BBS, and download any
        drivers, utilities and help files.

        If you still cannot get the LanModem working properly, our
        technical experts are always ready to help.  Please be at your
        computer, have your LanModem, Drivers Disk, and the following
        information available:

        * Version number of CARDEN.EXE or any drivers you are
          running
        * The extact text of any error message displayed on your screen
        * The type of computer
        * The type of network

  Copyrights, Trademarks, and Disclaimers
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
  All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
  rights reserved by Microsoft Corporation

  All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
  reserved by Novell Corporation

  Further rights reserved to their respective corporations


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.57