[AEC-67160]
V2.00 from V1.99
1. Fix GEM-359 scan problem :
(1) Busy problem : SCSI command Register (18H) -> from 09H change to 08H.
(2) Inquiry SCSI bus width problem : default scsi bus width is narrow
V2.01 from V2.00
1. Multi-Adapter supported.
-> Up to 3 adapter.
2. Bug Fixed : FDISK.EXE (INT13H) hang-up problem.
-> (1) After ASPI initialize complete, enable INTA# bit (Base+38H bit4).
(2) After ASPI command complete, re-enable INTA# bit (Base+38H bit4).
V2.02 from v2.01
1. Fixed PPR message : After check inquiry return data:
-> If byte 56 = 0x0c then send PPR message,
else ignore send PPR mesage.
2. Fixed SDT message : Check SDT message byte 3 :
-> Byte3 = Synchronous Transfer Register (I/O PORT 11)
<10h = Cxh.
<11h = Bxh.
<0ch = Axh.
<19h = 2xh.
<32h = 4xh.
<4Bh = 5xh.
<64h = 6xh.
3. Fixed WDT message : Save each ID bus width status in ram.
V2.03 from v2.02
1. Add ASPI command 07h : Re-Initialize Device.
V2.10 from V2.03
1. Modify Re-Initialize : Display scan information on screen.
==============================================================================
[AEC-67162]
V1.00 from AEC-67160 V1.99
1. Fix GEM-359 scan problem :
(1) Busy problem : SCSI command Register (18H) -> from 09H change to 08H.
(2) Inquiry SCSI bus width problem : default scsi bus width is narrow
2. Bug Fixed : FDISK.EXE (INT13H) hang-up problem.
-> (1) After ASPI initialize complete, enable INTA# bit (Base+38H bit4).
(2) After ASPI command complete, re-enable INTA# bit (Base+38H bit4).
3. Fixed PPR message : After check inquiry return data:
-> If byte 56 = 0x0c then send PPR message,
else ignore send PPR mesage.
4. Fixed SDT message : Check SDT message byte 3 :
-> Byte3 = Synchronous Transfer Register (I/O PORT 11)
<10h = Cxh.
<11h = Bxh.
<0ch = Axh.
<19h = 2xh.
<32h = 4xh.
<4Bh = 5xh.
<64h = 6xh.
5. Fixed WDT message : Save each ID bus width status in ram.
6. Add ASPI command 07h : Re-Initialize Device (with display information).
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.