Aec671x.inf Driver File Contents (aec671X_ver235_disk1.zip)

; AEC671X.INF -- This file contains descriptions of all the SCSI
;             Host Adapters supported in Windows NT

; Copyright (c) 1999, ACARD Technology Corp.

[version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
;CatalogFile=atp870.cat

Provider=%ProviderName%
LayoutFile=layout.inf

[DestinationDirs]
DefaultDestDir = 12 ; DIRID_DRIVERS

[ControlFlags]
;
; Exclude the following devices from Select Device list.
; These represent 'combination' driver nodes, for which there are separate items to be
; presented to the user.  These combination nodes are only used when figuring out what
; driver node to associate with a pre-existing service.
;
ExcludeFromSelect = SPARROW_SCSI, ARROW_SCSI, BUSLOGIC_SCSI, DPTSCSI_SCSI, FD16_700_SCSI, ATAPI_SCSI
ExcludeFromSelect = DAC960NT_SCSI, SYMC810_SCSI, NCR53C9X_SCSI, NCRC710_SCSI, FD8XX_SCSI, MITSUMI_SCSI

;
; Exclude the following devices from the platforms where they are not available.
;
ExcludeFromSelect.NTPPC = CPQARRAY_SCSI, DELLDSA_SCSI, *ADP1740, *ADP7770, *ADP7771, *ADP2840, AMI0NT_SCSI, mca_7f4c, mca_7f4d, mca_7f4f, MF\EISA_ZDS2000_DEV2, OLISCSI_SCSI, mca_004e, mca_01ba, *pnpa003, *ctl2001, *pnpA02B, *USC0140, *USC0141
ExcludeFromSelect.NTPPC = mca_01bb, *CPQ4410, *CPQ4411, mca_8eff, *PNPA022, *WDC2001, *FDC0950, *pnpa030, *pnpa031, *pnpa032, *USC0142, *USC0143, *USC0240, FLASHPNT_SCSI, CPQFWS2E_SCSI
ExcludeFromSelect.NTAlpha = mca_7f4c, mca_7f4d, mca_7f4f, MF\EISA_ZDS2000_DEV2, OLISCSI_SCSI, mca_004e, mca_01ba, mca_01bb, *CPQ4410, *CPQ4411, mca_8eff, *PNPA022, *WDC2001, *FDC0950, *pnpa030, *pnpa031, *pnpa032, *pnpa003, *ctl2001, *pnpA02B
ExcludeFromSelect.NTAlpha = *USC0140, *USC0141, *USC0142, *USC0143, *USC0240, FLASHPNT_SCSI, CPQFWS2E_SCSI
ExcludeFromSelect.NTMIPS = MF\EISA_ZDS2000_DEV2, *CPQ4410, *CPQ4411, mca_8eff, *PNPA022, *WDC2001, *FDC0950, *pnpa030, *pnpa031, *pnpa032, *pnpa003, *ctl2001, *pnpA02B, *USC0140, *USC0141, *USC0142, *USC0143, *USC0240, FLASHPNT_SCSI, CPQFWS2E_SCSI

;
; Exclude the generic (non-PCI) IDE description from all platforms.  We can't do this globally (i.e.,
; "ExcludeFromSelect" with no suffix) because then we'll think it was hidden because we wanted that to
; be the migration name.
;
ExcludeFromSelect.NTPPC = *PNP0600
ExcludeFromSelect.NTAlpha = *PNP0600
ExcludeFromSelect.NTMIPS = *PNP0600
ExcludeFromSelect.NTx86 = *PNP0600

[Manufacturer]
%MfgName%=ACARD


;****************************************************
; Manufacturer device list
[ACARD]
;%AEC671X.DeviceDesc%  = AEC671X_Inst, AEC671X_SCSI   ; Fake ID used during migration(NT Use only)
%AEC6710s.DeviceDesc% = AEC671X_Inst, PCI\VEN_1191&DEV_8002;&SUBSYS_80021191
%AEC6712W.DeviceDesc% = AEC671X_Inst, PCI\VEN_1191&DEV_8010;&SUBSYS_80101191
%AEC6712W.DeviceDesc% = AEC671X_Inst, PCI\VEN_1191&DEV_8010;&SUBSYS_00001191
%AEC6712U.DeviceDesc% = AEC671X_Inst, PCI\VEN_1191&DEV_8020;&SUBSYS_80201191
%AEC6712U.DeviceDesc% = AEC671X_Inst, PCI\VEN_1191&DEV_8020;&SUBSYS_00001191
%AEC6712S.DeviceDesc% = AEC671X_Inst, PCI\VEN_1191&DEV_8030;&SUBSYS_80301191
%AEC6710D.DeviceDesc% = AEC671X_Inst, PCI\VEN_1191&DEV_8040;&SUBSYS_80401191

[SourceDisksFiles]
;atp870.cat

[AEC671X_Inst]
CopyFiles = @AEC671X.sys
Reboot

[AEC671X_Inst.Services]
AddService = AEC671X, %SPSVCINST_ASSOCSERVICE%, AEC671X_Service_Inst, Miniport_EventLog_Inst

[AEC671X_Service_Inst]
ServiceType    = %SERVICE_KERNEL_DRIVER%
StartType      = %SERVICE_BOOT_START%
ErrorControl   = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\AEC671X.sys
LoadOrderGroup = SCSI Miniport

AddReg         = pnpsafe_pci_addreg

[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001 ; PCI Bus

[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg

[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7

[Strings]
ProviderName = "ACARD"
MfgName = "ACARD Technology Corp."
;AEC671X.DeviceDesc  = "ACARD AEC671X PCI SCSI Controller";(NT4 used only)
AEC6710s.DeviceDesc = "ACARD AEC6710 Series PCI SCSI Controller"
AEC6712W.DeviceDesc = "ACARD AEC6712UW PCI Ultra/W SCSI Controller"
AEC6712U.DeviceDesc = "ACARD AEC6712U/TU PCI Ultra SCSI Controller"
AEC6712S.DeviceDesc = "ACARD AEC6710S/6712S/TS PCI SCSI Controller"
AEC6710D.DeviceDesc = "ACARD AEC6710D PCI SCSI Controller"

;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START     = 0
SERVICE_ERROR_NORMAL   = 1
REG_EXPAND_SZ          = 0x00020000
REG_DWORD              = 0x00010001

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.88