*** ARTOP ATP8400 IDE cache controller
1. INSTALLING Windows NT DRIVERS
----------------------------------
* ATP8400A.SYS is designed for Microsoft windows NT miniport drivers.
This driver allows connection of IDE hard disk and ATAPI CDROM.
(1) Use the COPY command to copy the device drivers from the \WINNT directory
on the drivers diskette to root directory.
COPY A:\WINNT\*.* B:\
or
COPY B:\WINNT\*.* A:\
(2) Insert Windows NT boot disk and boot from floppy disk.
(3) On the Setup Method screen, choose "custom setup".
(4) The installation program will then scan for SCSI adapters.
(5) A screen will display the SCSI adpaters found. Choose "S" to configure
additional SCSI adapters.
(6) Move the highlight bar to "Other" and press "Enter"
(7) When prompted, insert the driver disk prepared by step (1).
(8) The ARTOP Miniport driver should be highlighted. Press Enter to proceed.
(9) NT should now recognize the ARTOP Miniport driver and the IDE hardware.
Then Please follow the Microsoft Windows NT installation procedure.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.