1. aec6620_ver10.zip Driver
2. README File Contents

README Driver File Contents (aec6620_ver10.zip)

              ARTOP ATP8400A Windows driver README File         Revision 1.20


* Microsoft Windows version 3.1 disk driver for ATP8400A
****For HARDDISK only, don't support for CD_ROM in windows environment.

     ARTOP ATP8400A Windows Driver support  32-bit disk access under Window
     environment, The driver support real 32 bits disk data transfer between
     host and the IDE adapter bus.Support upto 4 hard disk,Can coexist with
     Wdctrl.386.  Please use install program to install windows driver.
     If you want to manual install,Please reference follows.


     Install procedure(manual) as follows:


     1. Copy the drivers TopInt13.386 and TopCtrl.386 to your system.

        It is recommended that the drivers TopCtrl.386 be copied
        to the Windows SYSTEM directory.(c:\Windows\system)

     2. Edit the SYSTEM.ini file found in your Windows directory.
        Check if the following line exist in the [386Enh] section of
        your SYSTEM.ini file:

        [386Enh]
        32BitDiskAccess=ON

        If the statement does not exist, add it into the [386Enh] section.
        If the statement exists, but 32BitDiskAccess is set to "OFF", you
        need to change it to "ON".

     3. Add the following command lines in the [386Enh] section of the
        SYSTEM.INI file:

              device=[drive:][\path\]TopInt13.386
              device=[drive:][\path\]TopCtrl.386

        The [drive:] and [\path\] point to the directory that contains
        TOPCTRL.386 file. Note that the setting must specify the full
        path of the device drivers.