DIAGLED.TXT Driver File Contents (intelnic.zip)

   Diagnostic LEDs
                                                                    v1.03

Diagnostic LEDs for Intel 82557-based adapters:
     EtherExpress(TM) PRO/100B - TX
     EtherExpress(TM) PRO/100B - T4



EtherExpress PRO/100B - TX and T4 Adapters
==========================================

LNK:  Indicates the adapter is connected to a hub or switch and is
      receiving link pulses. If the LNK light isn't on, check all
      connections at the adapter and the hub. Make sure the hub is
      transmitting at the correct speed and the drivers are loaded.

      Also, make sure you have the correct wiring configuration for the
      adapter to the hub connection. Some hubs require a crossover cable
      rather than a straight-through cable.

      Note that this LED will be on when running the diagnostics loopback
      test without a cable attached to the adapter.

ACT:  Indicates read/write activity on the network. It doesn't always
      mean there is activity on this adapter. If the ACT light isn't on,
      make sure the hub and network are operating and the drivers are
      loaded.

100:  Indicates 100 Mbps when on, and 10 Mbps when off.

      Note that 100 LED may stay on if link is broken during activity.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.99