1. 4NHCT_Update.exe Driver
2. failover.ini File Contents

failover.ini Driver File Contents (4NHCT_Update.exe)

; 
; This is the configuration file for the client 2 node test.
;
; NOTENOTE: the key's are currently case sensitive. 
;

;
; ALLOW_GENRIC_APP 0x0001
; ALLOW_FTP        0x0002
; ALLOW_WEB        0x0004
; ALLOW_SHARE      0x0008
; ALLOW_NETNAME    0x0010
; ALLOW_IP         0x0020
; ALLOW_DISK       0x0040
;

; the name of the logfile
; time in minutes for the test to run

[Config]
    nNodes=2
    timer=480
    minClients=0
    maxClients=0
    log=.\failover.log
    resTypes=0x0041
    testdir=cluster
    title=Failover (Optional Phase)
    minResGrps=1

; 
; <remote_file_type>
;
;
; REMOTE_FILE_SCRIPT                 0x000
; REMOTE_FILE_BINARY                 0x001
; REMOTE_FILE_DRIVER                 0x002
; REMOTE_FILE_SERVICE                0x003
;
; REMOTE_FILE_TYPE_MASK              0x00f
;
; REMOTE_INSTALL                     0x000
; REMOTE_DONT_REINSTALL              0x010
; REMOTE_DONT_INSTALL                0x020
;
; REMOTE_INSTALL_MASK                0x030
;
; REMOTE_DONT_SET_FAIL_ACTION        0x000
; REMOTE_SET_FAIL_ACTION_NONE        0x040
; REMOTE_SET_FAIL_ACTION_RESTART     0x080
;
; REMOTE_SET_FAIL_ACTION_MASK        0x0C0
;
; REMOTE_SET_FAIL_ACTION_DELAY_MASK  0xF00  // 30 sec per count max 7.5 min
; REMOTE_SET_FAIL_ACTION_DELAY_SHIFT 0x8
;
;
; NOTENOTE: the type is the logical OR of the following
; NOTENOTE: this is defined in valdsrv.h
;
; <type>
;
; TYPE_UNKNOWN  0x00
; TYPE_NODE     0x01
; TYPE_CLIENT   0x02
; TYPE_LOCAL    0x04
; TYPE_SRV      0x08
; TYPE_RESTART  0x10
; TYPE_CRITICAL 0x20
;
;
;
; This is what is installed on the node
;
; <remote_file_type> [ |<service_name> ]=<file_name>

[Node_Files]
    0x003|qserv=%cpu%\qserv.exe
    0x003|spsrv -dll:remclus.dll|lanmanserver=%cpu%\spsrv.exe
    0x002|crashtst=%cpu%\crashtst.sys
    0x063|clussvc="already installed, just change restart action to none"
    0x001=%cpu%\qsend.exe
    0x001=%cpu%\lrgfile.exe
    0x001=%cpu%\ntlog.dll
    0x001=%cpu%\clntmr.dll
    0x001=%cpu%\remclus.dll
    0x001=%cpu%\msvcp50.dll

;
; This is what is installed on the client 
;
; <remote_file_type> [ |<service_name> ]=<file_name>

[Clnt_Files]
    0x03|qserv=%cpu%\qserv.exe
    0x01=%cpu%\qsend.exe

;
; These are services that need to be registerd so they can be monitored.
; Processes are added when they are started.
;
; <file_name>=<type>
;
; critical_node_srv  == 0x29
; critical_node      == 0x21
; critical_local_srv == 0x2c
; client_srv         == 0x0a
;
[Register_Processes]
    0x221=clussvc.exe
    0x29=qserv.exe
    0x0a=qserv.exe
    0x21=spsrv.exe


[Tests]
    NodeTest=LrgFile_Node
    LocalTest=FailOver_Local


;
; The note that %foo% vars will be filled in at test start time.
;


[LrgFile_Node]
    type=0x01
    cmd=lrgfile.exe -I -r -o -j32 -b8 -t -v200 -Ylrgfile.log -flrgfile_node.tmp
    log=%disk%lrgfile.log

;
; This test must be started *after* everything else
; The test mgr is started on the local (ie master) clnt
;
[FailOver_Local]
    type=0x24
    cmd=spfail.exe -clustername:%clusname% -test:SPStressTimer -!test:stop -dll:spstresstimer.dll -log:spfail.log -IgnoreJoinFailures:*
    log=spfail.log

[ResTypes]
    ; the only resource type is the generic app, but that is created internally
    ; so we can manage the online offline stuff.  We still need and empty stub
    ; here so we don't get any bogus 'file corrupt' errors
    0x0|nt4=Empty ResType