1. 4NHCT_Update.exe Driver
2. DNCN_E.ini File Contents

DNCN_E.ini Driver File Contents (4NHCT_Update.exe)

; sample ini for volcheck

; all keynames are case inspecific
; boolean values default to false
; boolean values, or tristate (yes, no, dontcare)
; can have to value 'yes', 'no', 'dontcare', '0', '1' or '2'

[test]
Verbose=no
; decides whether or not to create full log dump
; DEBUG version of the test, default is YES
; RETAIL version of the test, default is NO

CheckAdapterDriver=no
; checks that the disks adapter drivers are all signed
CheckDiskDriver=no
; checks that the disk drivers are all signed
AdapterID1=PCI\VEN_9004&DEV_8178&SUBSYS_00000000&REV_80
; Adaptec AHA-2940U/AHA-2940UW PCI SCSI Controller
AdapterID2=PCI\VEN_9004&DEV_8178&SUBSYS_00000080
; Slightly more generic adaptec controller
AdapterID3=PCI\VEN_8086&DEV_7010&SUBSYS_00000000&REV_00
; any scis device
AllowOtherVolume=1

AllowOtherDisks=0
; wont fail if there are more disks than reqired for this test
; BUGBUG change this to bitmask of allowed disk types
AllowOtherAdapters=1
; Wont fail if there are other adapters in the system
MatchCMtoLDM=1
; currently unimplementd
; requires all Configuration Manager information to match information
; found by LDM
EnumOnly=1
; Doesn't test, just displays information
; about disks and volumes found in the system

Disk1=FixedDiskKey
Disk2=CDRomKey
; sectionsspecified by these keys are the reqired volume information
; in the case of Disk2, either the Disk represented by the DVDKey, OR the section
; in the DVDKey are required, but not both
; if both is undefined
; allowable spacers are ',', ';' and ' '
Platform=Win2000
; this is required to run on an NT box
; allowed values are 'WinNT', 'Win2000', 'Win98', 'Win9x', 'NT', and 'DONTCARE'
; if blank or not found, defaults to dontcare
MinBuildNumber=2031
; This key reqires that the test run on a version of the os that is greater or equal 
; than the build specified. Ignored if no platform specified


[AdapterClass]
SCSIAdapter=1
PCIIDE=1

[StorageClass]


[FixedDiskKey] ; pointed to by the test\disk1 key
BusType=IDE
; required disk bus type
; allowed values are 'IDE', 'SCSI', 'FIBER', 'FIBRE', 'USB', '1394', 'FIREWIRE'
MinSize=500
; minimum allowed size of the disk in MB
Required=yes
; Is this a requried device (?why is this here?)
DiskType=HDD
; allowed values are BASIC   DYNAMIC REMOVEABLE CDROM    DVD  HDD (either basic or dynamic)
MinRequired=1
MaxRequired=1
; Number of IDENTICAL drive devices on the same adapter
Position=DNNN

[CDRomKey] ; pointed to by the test\disk1 key
BusType=IDE
; required disk bus type
; allowed values are 'IDE', 'SCSI', 'FIBER', 'FIBRE', 'USB', '1394', 'FIREWIRE'
MinSize=500
; minimum allowed size of the disk in MB
Required=yes
; Is this a requried device (?why is this here?)
DiskType=CDROM
; allowed values are BASIC   DYNAMIC REMOVEABLE CDROM    DVD  HDD (either basic or dynamic)
MinRequired=1
MaxRequired=1
; Number of IDENTICAL drive devices on the same adapter
Position=NNDN

[Volume1]
FileSystem=NTFS
; allowed values are NTFS, FAT, FAT32, CDFS, and UDF??
Layout=Simple
; allowed values are simple, spanned, stripe, mirror, raid5
Compressed=dontcare
; is this volume required to support compression
OnDisk=FixedDiskKey
MinSize=500
; minimum size of this volume in MB

[Volume2]
FileSystem=FAT
; allowed values are NTFS, FAT, FAT32, CDFS, and UDF??
Layout=simple
; allowed values are simple, spanned, stripe, mirror, raid5
Compressed=dontcare
; is this volume required to support compression
OnDisk=FixedDiskKey
MinSize=500
; minimum size of this volume in MB

[Volume3]
FileSystem=NTFS
; allowed values are NTFS, FAT, FAT32, CDFS, and UDF??
Layout=simple
; allowed values are simple, spanned, stripe, mirror, raid5
Compressed=dontcare
; is this volume required to support compression
OnDisk=FixedDiskKey
MinSize=500
; minimum size of this volume in MB