; DDCN configuration ; Intel IDE controller ; path= \hct ; all keynames are case inspecific ; boolean values default to false ; boolean values, or tristate (yes, no, dontcare) ; can have to value 'yes', 'no', 'dontcare', '0', '1' or '2' [test] Verbose=no ; decides whether or not to create full log dump ; DEBUG version of the test, default is YES ; RETAIL version of the test, default is NO CheckAdapterDriver=no ; checks that the disks adapter drivers are all signed CheckDiskDriver=no ; checks that the disk drivers are all signed AdapterID1=PCI\VEN_8086&DEV_7111&SUBSYS_00000000 ; Intel 82371AB PIIX4 AdapterID2=PCI\VEN_10B9&DEV_5229 ; Acer Laboratories M5229 AdapterID3=PCI\VEN_1095&DEV_0646 ; CMD Technology Ultra ATA Controller (PCI-0646U) AdapterID4=PCI\VEN_1095&DEV_0646&SUBSYS_06461095 ;CMD Technology PCI-0646U2 AdapterID5=PCI\VEN_105A&DEV_4d38 ; Promise Technology Ultra 66 AdapterID6=PCI\VEN_10B9&DEV_5229&SUBSYS_52454341 ; IBM ALi M5229 Bus Master PCI to IDE Controller v 3.40 AdapterID7=PCI\CC_0101 ; Intel Intel 82801AA Ultra ATA Controller AdapterID8=PCI\VEN_8086&DEV_7010&SUBSYS_00000000 ; Intel(r) 82371SB PCI Bus Master IDE Controller AdapterID9=PCI\VEN_8086&DEV_2411&SUBSYS_24118086 ; Intel(r) 810 PCI Bus Master IDE Controller AllowOtherVolume=1 AllowOtherDisks=1 ; wont fail if there are more disks than reqired for this test ; BUGBUG change this to bitmask of allowed disk types AllowOtherAdapters=1 ; Wont fail if there are other adapters in the system MatchCMtoLDM=1 ; currently unimplementd ; requires all Configuration Manager information to match information ; found by LDM EnumOnly=1 ; Doesn't test, just displays information ; about disks and volumes found in the system Disk1=FixedDiskKey Disk2=CDRomKey ; sectionsspecified by these keys are the reqired volume information ; in the case of Disk2, either the Disk represented by the DVDKey, OR the section ; in the DVDKey are required, but not both ; if both is undefined ; allowable spacers are ',', ';' and ' ' ;Platform=Win2000 ; this is required to run on an NT box ; allowed values are 'WinNT', 'Win2000', 'Win98', 'Win9x', 'NT', and 'DONTCARE' ; if blank or not found, defaults to dontcare ;MinBuildNumber=2031 ; This key reqires that the test run on a version of the os that is greater or equal ; than the build specified. Ignored if no platform specified [AdapterClass] SCSIAdapter=1 PCIIDE=1 [StorageClass] [FixedDiskKey] ; pointed to by the test\disk1 key BusType=IDE ; required disk bus type ; allowed values are 'IDE', 'SCSI', 'FIBER', 'FIBRE', 'USB', '1394', 'FIREWIRE' MinSize=500 ; minimum allowed size of the disk in MB Required=yes ; Is this a requried device (?why is this here?) DiskType=HDD ; allowed values are BASIC DYNAMIC REMOVEABLE CDROM DVD HDD (either basic or dynamic) MinRequired=2 MaxRequired=2 ; Number of IDENTICAL drive devices on the same adapter Position=DDNN [CDRomKey] ; pointed to by the test\disk1 key BusType=IDE ; required disk bus type ; allowed values are 'IDE', 'SCSI', 'FIBER', 'FIBRE', 'USB', '1394', 'FIREWIRE' MinSize=500 ; minimum allowed size of the disk in MB Required=yes ; Is this a requried device (?why is this here?) DiskType=CDROM ; allowed values are BASIC DYNAMIC REMOVEABLE CDROM DVD HDD (either basic or dynamic) MinRequired=1 MaxRequired=1 ; Number of IDENTICAL drive devices on the same adapter Position=NNDN [Volume1] FileSystem=NTFS ; allowed values are NTFS, FAT, FAT32, CDFS, and UDF?? Layout=Simple ; allowed values are simple, spanned, stripe, mirror, raid5 Compressed=dontcare ; is this volume required to support compression OnDisk=FixedDiskKey MinSize=500 ; minimum size of this volume in MB [Volume2] FileSystem=FAT ; allowed values are NTFS, FAT, FAT32, CDFS, and UDF?? Layout=simple ; allowed values are simple, spanned, stripe, mirror, raid5 Compressed=dontcare ; is this volume required to support compression OnDisk=FixedDiskKey MinSize=500 ; minimum size of this volume in MB [Volume3] FileSystem=NTFS ; allowed values are NTFS, FAT, FAT32, CDFS, and UDF?? Layout=mirror ; allowed values are simple, spanned, stripe, mirror, raid5 Compressed=dontcare ; is this volume required to support compression OnDisk=FixedDiskKey MinSize=500 ; minimum size of this volume in MBDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.