*****************************************************************************
* *
* CompactFlash 10/100 Fast Ethernet LAN Card *
* README.TXT Copyright (C) 2001 *
* *
*****************************************************************************
The CompactFlash 10/100 Fast Ethernet LAN Card provides the capability
for any Windows CE to connect to a Local Area Network (LAN).
CONTENTS
~~~~~~~~
<> Included Drivers
<> How to Install Drivers
<> CompactFlash 10/100 Fast Ethernet LAN Card Network Configuration Setup
<> Included Drivers
The drivers in the CF100_CE2NoNet.exe supports "MIPS" and "SH3" for Windows CE 2.0, 2.11
that comes with no build-in Network function. After driver installation, the Network
function will be added in the Control Panel.
<> How to Install Drivers:
Step 1. Connect your Host PC to your Handheld via the serial cable by
selecting Start/Programs/Communication/PC Link.
Step 2. Run CF100_CE2NoNet.exe file to install CompactFlash 10/100 Fast Ethernet LAN Card drivers.
Step 3. Network Configuration Setup (see below).
Step 4. Insert CompactFlash 10/100 Fast Ethernet LAN Card to Handheld.
Step 5. Reboot Handheld to initiate the Network function.
<> CompactFlash 10/100 Fast Ethernet LAN Card Network Configuration Setup:
A. Using static IP Address:
Step 1. Tap Start->Settings->Control Panel->Network icon.
Step 2. Make sure "CF 10/100 Ethernet Driver" is highlighted.
Step 3. Tap on Properties.
Step 4. Under the IP Address tab, make sure the "Specify an IP address"
radio button is selected.
Step 5. Key in IP Address & Subnet Mask & Default Gateway addresses.
Step 6. Tap the Name Servers tab.
Step 7. Key in DNS and WINS addresses, if necessary.
B. Using DHCP:
Step 1. Tap Start->Settings->Control Panel->Network icon.
Step 2. Make sure "CF 10/100 Ethernet Driver" is highlighted.
Step 3. Tap on Properties.
Step 4. Under the IP Address tab, make sure the "Obtain an IP address
via DHCP" radio button is selected.
Step 5. Tap the Name Servers tab.
Step 6. Key in DNS and WINS addresses, if necessary.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.