10/100 Fast Ethernet CardBus PC Card
NETWARE DOS/ODI DRIVER INSTALLATION
NetWare DOS ODI Workstation Driver Installation
================================================
Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the adapter is properly installed and configured. Make sure
that the your NetWare operating system is properly installed.
1. Run the following command in the order given below and
press <Enter>:
rem Please Add LASTDRIVE=M in config.sys
CBOPEN
LSL
FASTNIC
IPXODI
NETX
n:login
2. You can now log into the Novell server.
INSTALLATION NOTE
-----------------
You can bind several frame types to the IPX protocol to support various
configurations -- in the Link Driver ACCMLID section of the NET.CFG
file.
SAMPLE:
Link Driver ACCMLID
frame Ethernet_802.2
frame Ethernet_802.3
frame Ethernet_II
frame Ethernet_snap
protocol IPX E0 Ethernet_802.2
---
All trademarks and brand names mentioned belong to their
respective owners.
-- THE END --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.