10/100 Fast Ethernet CardBus PC Card Packet Driver Installation PKTDRV.COM is the packet driver for the CardBus PC Card. Before running PKTDRV.COM, please execute the CardBus PC Card enabler, CBOPEN.EXE. PKTDRV syntax: PKTDRV [-#] [-a] [-b] [-t] [-f] [-s] [-d] [-n] [-w] [-u] [-h] <PD_INT_NO> where: [-#] The "-#" option selects a specific CardBus PC Card when there are multiple CardBus cards installed in the computer. "-1" specifies the card in socket 0 which CBOPEN enabled. "-2" specifies the card in socket 1 which CBOPEN enabled. [-a] The "-a" option tells the driver to perform automatic media detection during driver initialization. [-t] The "-t" option tells the driver to use Twisted Pair (RJ-45) (10BASE-T) as the transmission media. [-f] The "-f" option enables the FULL_DUPLEX feature of the card. It has effect only when Twisted Pair is used. [-s] The "-s" option sets the link speed to 100 Mbps. [-n] Your NOVELL server uses NOVELL ISO-like packets. Your NOVELL workstation uses NOVELL 8137 packets. You can use this option to convert NOVELL 8137 packets into NOVELL ISO-like packets. [-w] Steve Wallace added a hack to let the packet drivers run under Windows. This is not to be construed with the proper solution, which is to write a TCP/IP package for Windows. This hack is enabled only when you use the '-w' switch. [-u] This option unloads the Packet Driver. [-h] This option displays the on-line help. <PD_INT_NO> This specifies the software interrupt (INT) where you'll load the packet driver. It must be in the range 0x60 to 0x6F. Notice!! The PC/TCP kernel, by default, is loaded at interrupt 0x61 (so don't load the packet driver there!) Example: The following command line loads the Packet Driver at software interrupt 60h, and the transmission media is automatically detected. The I/O base address and the IRQ value are read from the CardBus card's configuration space. CBOPEN PKTDRV -a 0x60 or PKTDRV 0x60 Note: 1) The default transmission media is automatic-detection. 2) Prefixing the parameters with 0x indicates that this is a hexadecimal number.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.