1. DM3XHPRP.EXE Driver
2. README.TXT File Contents

README.TXT Driver File Contents (DM3XHPRP.EXE)

  DeskMate 3.0 or Higher Password Recovery Program for Home Organizer

The password program enables the user to find out the password of a
DeskMate Home Organizer data file. Using this program, the user can
then retain the same password, change that password to something of
his/her choice, or delete the password altogether.


This disk contains the following files--

   PASSWORD.EXE
   README.TXT


In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure your printer is switched on, is on line,
and at the C:\> prompt, type in the following command--

   PRINT A:README.TXT

and press <Enter>.


INSTALLATION

1.  Start up your computer.

2.  Insert this disk in Drive A.

3.  At the C:\> prompt, type in

       CD \DESKMATE

    and press <Enter>.

NOTE: In the above CD command, DESKMATE is the name of the DeskMate
      directory on your system. If the name of this directory is not
      DESKMATE, substitute the appropriate name in the place of
      DESKMATE in this CD command line.

4.  Type in

       COPY A:PASSWORD.EXE

    and press <Enter>. This command copies the PASSWORD program to
    the DeskMate directory on your Hard Drive.

5.  Type in

       PASSWORD

    and press <Enter>.

6.  Press the down arrow key to move the cursor to the file whose
    password you wish to access, and press <Enter>.

7.  At the New Password prompt--

    (a) to retain the same password, press <Enter>.

    (b) to remove the current password, press the <*> key and
        <Enter>.

    (c) to change the current password, type in the new password and
        press <Enter>. Make a note of the new password.

8.  Press <Esc> and <Y> to exit the password program.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."