1. LOGI34.EXE Driver
2. README.TXT File Contents

README.TXT Driver File Contents (LOGI34.EXE)

  Logitech Mouse Drivers Version 3.40 (260-1199)

These drivers enable the user to utilize the LOGITECH Mouse on
an IBM PC, XT, AT, 386, 486,, or compatible computer with
various application programs.


This disk contains the following files--

   README.DOC    INSTALL.BAT   MOUSE.COM     MOUSE.SYS
   LMOUSE.DRV    CLICK.EXE     CLICK.SRC     MENU.COM
   NEWCLICK.EXE  NEWMENU.EXE   DOS.DEF       EDLIN.DEF
   EXASSIGN.DEF  EXBEGIN.DEF   EXCHORDS.DEF  EXEXECUT.DEF
   EXMATCH.DEF   EXMENU.DEF    EXPOPUP.DEF   EXTYPE.DEF
   FW.DEF        KEYBASE.DEF   MOD.DEF       PROLOG.DEF
   QMODEM.DEF    SC3.DEF       SC4.DEF       SYMPHONY.DEF
   TURBO.DEF     VP.DEF        WP.DEF        WPS.DEF
   WS.DEF        XTREE.DEF     ANSWER.COM    AUTOCAD.BAT
   CHGDIR.BAT    COMCHECK.EXE  DOPATH.EXE    HIDEDRVR.EXE
   INS2.BAT      KEYTEST.EXE   MKCD.COM      MKCD2.COM
   MSC.BAT       MTRACK40.EXE  SYNTAX.DOC    BUS.SCR
   CHOOSEDR.SCR  CONSTD.SCR    DIRERROR.SCR  DIREXIST.SCR
   DONE.SCR      DSKERR.SCR    GOMOUSE.SCR   LOGIMENU.SCR
   MAIN.SCR      MCOM2.SCR     MKDIR.SCR     PS2.SCR
   S1.SCR        README.TXT


In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure your printer is switched on, is on line,
and at the C:\> prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.


Additional information (including install instructions) for these 
drivers is included in the README.DOC file on this diskette. In order 
to print the README.DOC file, insert this drivers disk in Drive A. At
the C:\> prompt, type in the following--

   PRINT A:README.DOC

and press <Enter>. The README.DOC is several pages long.



NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.