4825 SX & 4850 EP SVGA 1024 NI Drivers for Windows 3.0 (250-5141/2 & 250-5143) *** Requires High Density Disk *** These drivers enable the user to run several software applications under the VGA 1024 video controller's Super VGA screen modes. The list of screen modes and the software applications are listed in the README.DOC file on this diskette. These drivers are for the TANDY 4825 SX, and 4850 EP computers. This disk contains the following files-- README.TXT TRANSLAT.BAT README.DOC LOOK.COM ACAD.LIF CADVANCE.LIF FRAMEWRK.LIF GEM3.LIF GENERIC.LIF INSTALL.EXE INSTALL.DAT INSTALL.LIF INSTALL.00 LOTUS.LIF OS2800.DLL OS2800.DDP OS21024.DLL OS21024.DDP PCAD.LIF UTILITY.LIF VCAD.LIF WIN3.LIF WP.LIF WS3_3.LIF DISK.ID In order to obtain a printout of this README.TXT file, insert this disk in Drive A, make sure your printer is switched on, is on line, and at the C:\> prompt, type the following command-- PRINT A:README.TXT and press <Enter>. The installation instructions for these drivers are included in the README.DOC file on this diskette. In order to print the README.DOC file, insert this drivers disk in Drive A. At the C:\> prompt, type in the following-- PRINT A:README.DOC and press <Enter>. The README.DOC file is 39 pages long. NOTE: * The installation instructions for drivers for Windows 3.0 are on Page 28 of the README.DOC file. NOTE: "While reasonable efforts have been taken in the preparation of this information to assure its accuracy, Tandy Corporation/Radio Shack assumes no liability resulting from the use of the information contained herein."Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.