README.TXT Driver File Contents (CRDLSSMD.EXE)

  Cordless Mouse Driver (250-2006) 

This driver enables the user to utilize the Cordless Mouse on an
IBM PC, XT, AT, 386, 486, or compatible computer with an RS-232
serial port.


This disk contains the following files--

   MOUSE.COM
   TEST.COM
   README.TXT


In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure your printer is switched on, is on line,
and at the C:\> prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.



INSTALLATION

1.  Charge the mouse fully (as outlined on Pages 3 and 4 in the 
    User's Guide for this mouse). A mouse is fully charged and
    ready to use in about 15 hours.

2.  Start up your computer.

3.  Insert this disk in Drive A.

4.  Type

       MD C:\MOUSE

    and press <Enter>.

5.  Type

       COPY A:\*.* C:\MOUSE

    and press <Enter>. This copies the files from the drivers disk to 
    a directory called MOUSE on the hard drive.

6.  Type
    
       CD \MOUSE
    
    and press <Enter>.

7.  At the C:\MOUSE> prompt, type

       TEST

    and press <Enter>. A screen appears which lets you test the mouse's
    movement and buttons. For further description of this screen, refer
    to pages 6 and 7 of the User's Guide under the topic TESTING THE
    INSTALLATION.


NOTE:
   *To remove the Cordless Mouse Driver from the computer's memory,
    at the C:\MOUSE> prompt, type

       MOUSE /O

    and press <Enter>.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.27