IMPORTANT NOTES: * for Windows 95 installation 1. Make sure that your Windows 95 system is setup completed. 2. Turn off power and plug in sound card then turn on power. 3. Windows 95 will auto detect your sound card and ask drivers disk. Insert the disk,Windows 95 will auto setup PnP drivers and enter Windows 95 system. Now, you can hear the Windows starting sound. If not,please run UINSTDRV.EXE to uninstall PnP device drivers and reboot Windows 95 to install again. 4. Press Start button and select run item. Typing your drivers disk path and SETUP (ex. A:\SETUP) to install sound card Windows applications. SPECIAL NOTE: 1. The DOS mode MPU-401 emulator uses WSS mode to output, so please select SB16 mode as waves (voice) output device. 2. Please notice the I/O resource of DOS mode MPU-401 emulator in 'System' of 'Control Panel'. Select same I/O resource as I/O port of MPU-401 General MIDI in DOS games or applications. 3. Because we use two devices (SB16 & WSS) to perform full- duplex functions, some applications will detect the sound card not a full-duplex one. Please make sure that the playback device is set to "Sound System Playback" and the record device is set to "SB16 Record" in "Multimedia" of "Control Panel", the item "Use preferred devices only" must also be marked. In IPhone 5.0, even when you select the playback and record devices to different ones, still the system will detects the card as being not full-duplex. Even so, you have to set the devices to different ones to enable the full-duplex functions. In fact, the full-duplex functions still work in this way. 4. A3D interface is available only when the playback device is set to "Sound System Playback" in "Multimedia" of "Control Panel". 5. If you want to run games in Windows 95 DOS box or shut down to DOS, you don't have to install DOS drivers. But, If you want to run games in pure DOS enviroment, please press 'F8' key and select 'COMMAND PROMPT ONLY' to enter DOS during booting to install DOS drivers only (don't specify windows directory).Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.