Windows 2000
Introduction:
-------------
This document describes the procedure to install Windows 2000
driver for Asante GigaNIX 2032T PCI Gigabit Ethernet adapter.
Location of Driver : \Win2000\RT8169N5.SYS
Installing driver procedure on Microsoft Win2000 :
-------------------------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Win2000, it will auto-detect your system configuration
and find the adapter hardware.
1. When Windows 2000 prompts with "PCI Ethernet Controller" in
"New Hardware Found" dialog box, click the "Next" button.
2. Select "Search for the best driver for your device (Recommended)"
form the "Add New Hardware Wizard" dialog box, then click the
"Next" button.
3. Insert the Realtek RTL8169 driver disk into drive A and specify
the setup file pathname A:\Win2000, then click the "Next" button.
4. Windows 2000 will prompt with "Realtek RTL8169 Gigabit Ethernet
Adapter" in the "Add New Hardware Wizard" dialog box.
5. Click the "Next" button in the "Add New Hardware Wizard" dialog
box,then Windows 2000 will copy the driver(.sys) from A:\Win2000
to the C:\WINDOWS\SYSTEM directory and the driver(.inf) from
A:\Win2000 to the C:\WINDOWS\INF directory.
6. When Windows prompts with "Realtek RTL8169 Gigabit Ethernet
Adapter" in the "Add New Hardware Wizard" dialog box, click
the "Finish" button.
7. Win2000 will finish the other installation procedure
automatically, then you restart the system.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.