Oemsetup.inf Driver File Contents (GN1032TPC_1_3_DR.zip)

; Copyright (c) 2000-2002 Asante Technologies, Inc., All Rights Reserved 

[Version]
Signature="$Windows NT$"
Class=Net
ClassGUID={4D36E972-E325-11CE-BFC1-08002BE10318}
Provider=%Asante%

[Strings]
%Asante% = "Asante Technologies, Inc."

[Identification]
OptionType = NetAdapter

[PlatformsSupported]
    PCI

[Options]
   NSCGIGA 

[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "Asante Technologies, Inc"
ProductMajorVersion     = "4.0"
ProductMinorVersion     = "2.50"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
VendorID = 4107  ;; 100B (DEC)
ProductSoftwareName     = "DP83820"
ProductSoftwareTitle    = "Asante FriendlyNET GigaNIX 1000 Deserial PCI Adapter"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\DP83820.sys"
NetRuleSoftwareType     = "DP83820Sys ndisDriver DP83820Driver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """DP83820Sys"" yes no container"
NetRuleSoftwareClass    = {"DP83820Driver basic"}
NetRuleSoftwareSWBindable = {"DP83820Driver NSCGIGAAdapter non exclusive 100"}
ProductHardwareName = "DP83820"
ProductHardwareNSCGIGATitle = "Asante FriendlyNET GigaNIX 1000 Adapter"
NetRuleHardwareNSCGIGAType  = "NSCGIGA NSCGIGAAdapter"
NetRuleHardwareNSCGIGAClass = {"NSCGIGAAdapter basic"}
AdapterNSCGIGAType = 5   ;; PCI board
HelpNSCGIGAId = 30
NSCGIGACFID = 2232331     ;; 0x0022100B
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

HandleNull   = ""
NSCCONFIG_HANDLE = $(HandleNull)


[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

;
;  Initialize general constants
;
[InitGeneralConstants]
KeyInfo            = {}
CurrentControlSet  = "SYSTEM\CurrentControlSet"
ServicesBaseName   = $(CurrentControlSet)"\Services"
NetworkCardKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards"

!RegLastError      = NO_ERROR

[DebugOptions]
;
;   Debugging variables
;
    !G:DebugOutputControl = 1
    TraceConfig = 1


[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)


    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	   goto returnoptions
	else
	   set Status = STATUS_NOTSUPPORTED
	   goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)


    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL


    EndWait

Begin = +


    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
	  Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	       Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	       ifint $($ShellCode) != $(!SHELL_CODE_OK)
		     goto ShellCodeError
	       endif
	       set Error = $($R0)
	       set from = end
	       set to = end
	       goto nonfatalinfo
	  else
	       set StartLabel = configureadapter
	  endif
   else
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +


    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	   endif
	   goto end
	else
	   Shell $(UtilityInf), CardExistedDlg
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	      goto ShellCodeError
	   endif
	   ifstr(i) $($R1) != "OK"
	       set CommonStatus = STATUS_USERCANCEL
	       goto end
	   endif
	   set OldVersionExisted = $(TRUE)
	endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
	Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Goto ShellCodeError
	Else-Ifstr(i) $($R0) == STATUS_FAILED
	    Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	    endif
	    set Error = $($R0)
	       Goto fatal
	Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	       Goto successful
	Endif
	Set SrcDir = $($R1)
    endif
    Goto installproduct

configureadapter = +


   Ifstr(i) $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	   Goto fatalregistry
	Endif
    Endif
;Getting service key
   read-syms DebugOptions
   Debug-Output "NSC.INF: In [InstallOption] section"
   Debug-OutPut "NSC.INF: start of the test"

    read-syms InitGeneralConstants
    set FS_KeyThisService = ""
    set FS_KeyComponent   = $(KeyProduct)

    Shell $(UtilityInf), BaseServiceKey

    set FS_KeyServices = $($R1)
    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
       goto F_S_Return
    endif
;
;  Obtain the values for the component key.
;
    EnumRegValue $(FS_KeyComponent) FS_ValueList

    set FS_SvcName = ""
   Debug-OutPut "NSC.INF:  Service Name"$(FS_SvcName)
    ForListDo $(FS_ValueList)
        set FS_ValueName = *($($),1)
        Ifstr(i) $(FS_ValueName) == ServiceName
            set FS_SvcName = *($($),4)
            goto F_S_Break1
        endif
    EndForListDo
F_S_Break1 = +
   Debug-OutPut "NSC.INF:  Service Name found : "$(FS_SvcName)
    Ifstr $(FS_SvcName) == $(KeyNull)
       set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
       goto F_S_Return
    endif

    OpenRegKey $(FS_KeyServices) "" $(FS_SvcName) $(MAXIMUM_ALLOWED) FS_KeyThisService
    Ifstr $(FS_KeyThisService) == $(KeyNull)
       set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
       goto F_S_Return
    endif

F_S_Return = +
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        Ifstr $(FS_KeyThisService) != $(KeyNull)
           CloseRegKey $(FS_KeyThisService)
           Goto fatalregistry
        endif
    endif
   Debug-OutPut "NSC.INF:  Service Name evauated : "$(FS_SvcName)    
; Call the dll with the parameter as service key name overhere
   LoadLibrary "" $(!STF_WINDOWSSYSPATH)\nscconfig.dll NSCCONFIG_HANDLE

   LibraryProcedure Result, $(NSCCONFIG_HANDLE), +
            NSCConfigEntryPoint,  $(FS_SvcName) $(!STF_HWND)

   Ifstr(i) $(Result) == "Cancel"
	; cancel at install means remove any installing we've done
	; and possibly remove the files
	set CommonStatus = STATUS_USERCANCEL
	Debug-Output "Returned from dll with "$(Result)
	FreeLibrary $(NSCCONFIG_HANDLE)
	CloseRegKey $(FS_KeyThisService)
	goto end
   Endif
   FreeLibrary $(NSCCONFIG_HANDLE)
   CloseRegKey $(FS_KeyThisService)
;*************************************************************************
;  end of FindService
;*************************************************************************
    
    ifstr(i) $(!NTN_InstallMode) == configure
      goto end
    endif
     

installproduct =+


    StartWait
	set-div DeviceID = $($(Option)CFID) 65336
	Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	     goto ShellCodeError
	endif
	ifstr(i) $($R0) == {}
	     set Error = $(CANNOT_FIND_ANY_CARD)
	     set CommonStatus = USER_CANCEL
	     set from = end
	     goto nonfatal
	endif
	set AdapterList = $($R0)

    ifint $(OldVersionExisted) == $(FALSE)
	Ifstr(i) $(DoCopy) == "YES"
	   Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	   Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Goto ShellCodeError
	   Else-Ifstr(i) $($R0) == STATUS_FAILED
	       Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	       ifint $($ShellCode) != $(!SHELL_CODE_OK)
		  goto ShellCodeError
	       endif
	       set Error = $($R0)
	       Goto fatal
	   Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	       Goto successful
	   Endif
	   Set SrcDir = $($R1)
	Endif
	install "Install-Option"
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	   Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	   endif
	   set Error = $($R0)
	   goto fatal
	endif
	Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
	    $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
	    $(NetEventDLL)
	Set OEM_ABANDON_SOFTWARE = TRUE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $($R1)
	    CloseRegKey $($R2)
	    CloseRegKey $($R3)
	    CloseRegKey $($R4)
	    CloseRegKey $($R5)
	    goto fatalregistry
	endif
	Set SoftProductKey      = $($R1)
	Set SoftNetRuleKey      = $($R2)
	Set SoftServiceKey      = $($R3)
	Set SoftParameterKey    = $($R4)
	Set SoftLinkageKey      = $($R5)
	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
			   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
			   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
			   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
			   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
			   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
			   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $(SoftProductKey)
	    CloseRegKey $(SoftNetRuleKey)
	    CloseRegKey $(SoftServiceKey)
	    CloseRegKey $(SoftParameterKey)
	    CloseRegKey $(SoftLinkageKey)
	    goto fatalregistry
	endif
	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
			    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	CloseRegKey $(SoftProductKey)
	CloseRegKey $(SoftNetRuleKey)
	CloseRegKey $(SoftServiceKey)
	CloseRegKey $(SoftParameterKey)
	CloseRegKey $(SoftLinkageKey)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    goto fatalregistry
	endif
    endif
    ForListDo $(AdapterList)
	set BusNum = *($($),1)
	set DeviceNum = *($($),2)
	set FunctionNum = *($($),3)

		Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
		    $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"

		ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    goto ShellCodeError
		endif
		ifstr $($R0) != "NO_ERROR"
		    set Error = $($R0)
		    goto fatal
		endif
		ifstr(i) $($R1) != "YES"
		    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
		    ifint $($R4) != -1
			Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
		    endif
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    set RegistryErrorIndex = $($R0)
		    Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
			 EndWait
			 CloseRegKey $($R1)
			 CloseRegKey $($R2)
			 CloseRegKey $($R3)
			 goto fatalregistry
		    endif
		    ; Default Values
	        set NetworkIndex = "AutoNegotiate"
		    set RxIntrHold = "0"                 
		    set TxIntrHold = "0"                 
		    set JumboIndex = "1) 1514 (Standard)"                        
		    set VLANID = "0"                        
		    set PauseCounterVal = "65535"                        
		    set NcBitIndex = "Enabled"                        
		    set PriQIndex = "Disabled"                        
		    set RxQueueSz = "106"                    
		    set TxQueueSz = "2048"                   
		    set RxCacheLineSizeValue = "512"               
		    set TxCacheLineSizeValue = "1024"               
		    set FlowControl = "Enable"       	
		    set PsSHi = "8"       	
		    set PsSLo = "4"       	
		    set PsDHi = "8"       	
		    set PsDLo = "4"       	
		    set TxFlth = "1"                        
		    set RxDrth = "0"                        
		    set TxDrth = "0"                        
       		set NcBitValue = *($(EDValues), ~($(EDList),$(NcBitIndex)))
       		set PriQValue = *($(EDValues), ~($(EDList),$(PriQIndex)))
	   	    set JumboValue = *($(JumboValues), ~($(JumboList),$(JumboIndex)))
	   	    set FlowControlValue = *($(FlowControlValues), ~($(FlowControlList),$(FlowControl)))
		    set NetworkValue = *($(NetworkValues), ~($(NetworkList),$(NetworkIndex)))
		    Set HardNetCardKey      = $($R1)
		    Set HardNetRuleKey      = $($R2)
		    Set HardParameterKey    = $($R3)
		    set AdapterNumber = $($R4)
		   
		    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
					{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
					{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
					{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
					{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
					{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
		    Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			 goto ShellCodeError
		    endif
		    set BusTypeNum = 5


		    set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
					{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
					{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
					{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)},+
					{NetworkMedia,$(NoTitle),$(!REG_VT_SZ),$(NetworkValue)},+
					{RxIntrHold,$(NoTitle),$(!REG_VT_SZ),$(RxIntrHold)},+
					{TxIntrHold,$(NoTitle),$(!REG_VT_SZ),$(TxIntrHold)},+
					{NcBit,$(NoTitle),$(!REG_VT_SZ),$(NcBitValue)},+
					{PriQ,$(NoTitle),$(!REG_VT_SZ),$(PriQValue)},+
					{RxQueueSz,$(NoTitle),$(!REG_VT_SZ),$(RxQueueSz)},+
					{TxQueueSz,$(NoTitle),$(!REG_VT_SZ),$(TxQueueSz)},+
					{RxDMA,$(NoTitle),$(!REG_VT_SZ),$(RxCacheLineSizeValue)},+
					{TxDMA,$(NoTitle),$(!REG_VT_SZ),$(TxCacheLineSizeValue)},+
					{FlowControl,$(NoTitle),$(!REG_VT_SZ),$(FlowControlValue)},+
					{PsSHi,$(NoTitle),$(!REG_VT_SZ),$(PsSHi)},+
					{PsSLo,$(NoTitle),$(!REG_VT_SZ),$(PsSLo)},+
					{PsDHi,$(NoTitle),$(!REG_VT_SZ),$(PsDHi)},+
					{PsDLo,$(NoTitle),$(!REG_VT_SZ),$(PsDLo)},+
					{TxFlth,$(NoTitle),$(!REG_VT_SZ),$(TxFlth)},+
					{RxDrth,$(NoTitle),$(!REG_VT_SZ),$(RxDrth)},+
					{TxDrth,$(NoTitle),$(!REG_VT_SZ),$(TxDrth)},+
					{PauseCounterVal,$(NoTitle),$(!REG_VT_SZ),$(PauseCounterVal)},+
					{JumboFrame,$(NoTitle),$(!REG_VT_SZ),$(JumboValue)}}

		    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    ifstr(i) $(Option) == "MULTIA"
			set NewValueList = {{ExternalSia,$(NoTitle),$(!REG_VT_DWORD),1},+
					    {SiaRegister0,$(NoTitle),$(!REG_VT_DWORD),$(SiaRegister0)},+
					    {SiaRegister1,$(NoTitle),$(!REG_VT_DWORD),$(SiaRegister1)},+
					    {SiaRegister2,$(NoTitle),$(!REG_VT_DWORD),$(SiaRegister2)}}
			Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
			    goto ShellCodeError
			endif
		    endif
		    set NewValueList = {{NetworkType,$(NoTitle),$(!REG_VT_DWORD),$(NetworkValue)}}
		    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
		    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
		    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
					{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
					{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
					{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
		    Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    CloseRegKey $(HardNetCardKey)
		    CloseRegKey $(HardNetRuleKey)
		    set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
					{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
					{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
		    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
		    CloseRegKey $(HardParameterKey)
		endif       
    EndForListDo
    EndWait
    goto successful

updateparameters =+

    set HardParameterKey    = $($R3)


   set NewValueList = {{NetworkMedia,$(NoTitle),$(!REG_VT_SZ),$(NetworkValue)},+
		       	{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
		       	{RxIntrHold,$(NoTitle),$(!REG_VT_SZ),$(RxIntrHold)},+
		       	{TxIntrHold,$(NoTitle),$(!REG_VT_SZ),$(TxIntrHold)},+
		       	{NcBit,$(NoTitle),$(!REG_VT_SZ),$(NcBitValue)},+
		       	{PriQ,$(NoTitle),$(!REG_VT_SZ),$(PriQValue)},+
			   	{RxQueueSz,$(NoTitle),$(!REG_VT_SZ),$(RxQueueSz)},+
			   	{TxQueueSz,$(NoTitle),$(!REG_VT_SZ),$(TxQueueSz)},+
			    {JumboFrame,$(NoTitle),$(!REG_VT_SZ),$(JumboValue)},+
				{FlowControl,$(NoTitle),$(!REG_VT_SZ),$(FlowControlValue)},+
				{VLANID,$(NoTitle),$(!REG_VT_SZ),$(VLANID)}}

    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    CloseRegKey $(KeyParameters)
    goto successful

bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    else
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $(!NTN_RegBase)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end

UpgradeSoftware = +
     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
	   Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error"
	       goto ShellCodeError
	   endif
	   set !UG_Filename = $($R0)
	   install "Install-Update"
	   ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	       goto fatal
	   endif
	   SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	   SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
	   CloseRegKey $(KeyProduct)
     else
	   goto fatalregistry
     endif
     goto end

successful = +
    goto end

abandon = +

    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end

warning = +

    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif

nonfatalinfo = +

    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg

nonfatal = +

    Set Severity = NONFATAL
    goto nonfatalmsg

nonfatalmsg = +

    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif

    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif

fatalregistry = +

    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal

fatal = +

    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    goto setfailed

ShellCodeError = +

    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +

    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end

end = +
    goto term

term = +
    Return $(CommonStatus)

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
	AddSectionFilesToCopyList Files-Utility1 $(SrcDir) $(!STF_WINDOWSSYSPATH)
	CopyFilesInCopyList
    Exit

[Install-Update]
   set STF_VITAL        = ""
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   CopyFilesInCopyList
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   CopyFilesInCopyList
   AddSectionFilesToCopyList Files-Utility1 $(SrcDir) $(!STF_WINDOWSSYSPATH)
   CopyFilesInCopyList
   exit


[Source Media Descriptions]
    1  = "Asante DP83820 WINNT Deserial Driver" 

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha

[Files-Inf]
2,      oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)

[Files-NSCGIGA]
1,DP83820.SYS , SIZE=999
[Files-Utility1]
1,nscconfig.dll, SIZE=999

[LanguagesSupported]
    ENG

[OptionsTextENG]
    NSCGIGA  = "Asante FriendlyNET GigaNIX 1000 Adapter"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "Asante FriendlyNET GigaNIX 1000 Deserial PCI Adapter"

FunctionNSCGIGATitle = "Asante FriendlyNET GigaNIX 1000 Deserial PCI Adapter"
ProductHardwareNSCGIGADescription = "Asante FriendlyNET GigaNIX 1000 Deserial PCI Adapter"

NetworkList  = ^(NetworkChoices, 1)
NetworkValues = ^(NetworkChoices, 2)
JumboList  = ^(JumboChoices, 1)
JumboValues = ^(JumboChoices, 2)
EDList  = ^(ED, 1)
EDValues = ^(ED, 2)
FlowControlList  = ^(FlowControl, 1)
FlowControlValues = ^(FlowControl, 2)

NoList  = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText      = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"

[DialogConstantsENG]
Help        = "Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[NetworkChoices]
    Connect_0 = "AutoNegotiate",  8
    Connect_7 = "Auto 1000",      1
    Connect_6 = "Auto 100",       2
    Connect_5 = "Auto 10",        3
    Connect_4 = "Force 100 Full", 4
    Connect_3 = "Force 100 Half", 5
    Connect_2 = "Force 10 Full",  6
    Connect_1 = "Force 10 Half",  7

[ED]
    Ed_1 = "Enabled", 		     1
    Ed_0 = "Disabled",           0

[JumboChoices]
	Fc_0 = "1) 1514 (Standard)", 	1514
	Fc_1 = "2) 4088", 				4088
	Fc_2 = "3) 8000 (Asante)",			8000
	Fc_3 = "4) 9014 (Alteon)",		9014
	Fc_4 = "5) 10000",				10000
	Fc_5 = "6) 16128 (Intel)",		16128

[FlowControl]
	Fc_0 = "Enable",  			3
	Fc_1 = "Tx Pause Frames", 	1
	Fc_2 = "Rx Pause Frames", 	2
	Fc_3 = "Disable", 			0
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.38