NW500.TXT Driver File Contents (aon325v22.zip)

   Server Driver for NetWare 5.00

   Introduction:
   -------------
   This document describes the procedure to install the NetWare v5.00
   server driver for AOpen AON-325 10/100M Fast Ethernet PCI Adapter.

   Location of Driver:     \NWSERVER\500\AON325.LAN


   Installation Procedure :
   ---------------------
      Before you start with the installation process, make sure that
      the Novell NetWare v5.00 server is properly installed.
      Similarly, your adapter should also be properly installed in your
      server.


      A. First time installation from the install menu

        1. Start the NetWare Server.

           > CD \NWSERVER
           > SERVER

        2. Execute "LOAD NWCONFIG" after booting up. Type:

              LOAD NWCONFIG

        3. Select "Driver options", -> "Configure network drivers", and
           -> "Select a driver".

        4. Press <Insert> key to install an unlisted driver.

        5. Please insert release driver diskette into floppy disk.

        6. Press <F3> to specify a different <PATH>. <PATH> is directory
           which include both AON325.LAN and AON325.LDI

              Ex. A:\NWSERVER\500

        7. Select "AON325.LAN ...".

        8. Select "Save parameters and load driver" after configuring adapter
           setting.

        9. NetWare server will loading/binding driver automatically.

       10. After the driver has been loaded, check whether all the frame types
           you want are specified for this driver in AUTOEXEC.NCF.


      B. The other time installation from the install menu

        1. Start the NetWare Server.

           > CD \NWSERVER
           > SERVER

        2. Execute "LOAD NWCONFIG" after booting up. Type:

              LOAD NWCONFIG

        3. Select "Driver options", -> "Configure network drivers", and
           -> "Select a driver".

        4. Select "AON325.LAN ..." in Select a driver window.

        5. Select "Save parameters and load driver" after configuring adapter
           setting.

        6. NetWare server will loading/binding driver automatically.

        7. After the driver has been loaded, check whether all the frame types
           you want are specified for this driver in AUTOEXEC.NCF.


      C. Modifying an existing NetWare 5.00 Server

        1. Insert driver diskette into floppy disk drive.

        2. Copy all provided LAN files into your dos directory
           which include SERVER.EXE.

           Ex. >COPY A:\NWSERVER\500\AON325.LAN C:\NWSERVER
               >COPY A:\NWSERVER\500\AON325.LDI C:\NWSERVER

        3. Start the NetWare Server.

           > CD \NWSERVER
           > SERVER

        4. From the Novell Server side, execute "LOAD NWCONFIG". Type:
          
              LOAD NWCONFIG

           Select <NCF files options>
           Select <Edit AUTOEXEC.NCF file>

        5. Add the following commands into the server's AUTOEXEC.NCF file.

           LOAD C:\NWSERVER\AON325 SLOT=1 FRAME=Ethernet_802.3 NAME=AON325_1_E83
           BIND IPX AON325_1_E83 NET=1111

           LOAD C:\NWSERVER\AON325 SLOT=1 FRAME=Ethernet_802.2 NAME=AON325_1_E82
           BIND IPX AON325_1_E82 NET=1113

           LOAD C:\NWSERVER\AON325 SLOT=1 FRAME=Ethernet_SNAP  NAME=AON325_1_ESP
           BIND IPX AON325_1_ESP NET=1115

           LOAD C:\NWSERVER\AON325 SLOT=1 FRAME=Ethernet_II    NAME=AON325_1_EII
           BIND IPX AON325_1_EII NET=1117

           Note: The SLOT parameter should be set as the number of the PCI slot
                 on which AON-325 resides.

        6. Restart the server again.

   NOTES:
   ------

      1. Installing Multiple LAN Adapters:

         The keyword "SLOT" is provided for multiple LAN adapters in a
         single server by the driver AON325.LAN. So, add "SLOT" in LOAD
         commands. For example:

         LOAD AON325 SLOT=1 FRAME=Ethernet_802.2 NAME=LAN_A
         BIND IPX TO LAN_A NET=111
         LOAD AON325 SLOT=2 FRAME=Ethernet_802.2 NAME=LAN_B
         BIND IPX TO LAN_B NET=222

      2. Use keyword AUTO, 100FULL, 100HALF, 10FULL, 10HALF to specify the
         media type of the AON-325.

         For example:

            ; Specify AUTO-DETECT
            LOAD AON325 AUTO FRAME=Ethernet_802.2 NAME=LAN_A
            BIND IPX TO LAN_A NET=111

            ; Specify 100Mbps, Half-duplex
            LOAD AON325 100HALF FRAME=Ethernet_802.2 NAME=LAN_A
            BIND IPX TO LAN_A NET=111

         The default media type is auto-detect(i.e. none of these keywords
         is specified).

      3. Installing One LAN adapter with Multiple Frame Types:

         When binding multiple frame types to one adapter, enter a LOAD
         and BIND statement for each frame type. Each LOAD statement will
         use a different network number on the bind statement.
         It is required to supply a name on each load line in order to avoid
         being prompted for which board to bind IPX to. If you do not
         have the name option in the AUTOEXEC.NCF, it will not execute
         completely without user intervention.

         Example:

           LOAD AON325 FRAME=ETHERNET_802.3 NAME=AON325_1_E83
           BIND IPX TO AON325_1_E83 NET=11111

           LOAD AON325 FRAME=ETHERNET_802.2 NAME=AON325_1_E82
           BIND IPX TO AON325_1_E82 NET=33333

           LOAD AON325 FRAME=ETHERNET_SNAP  NAME=AON325_1_ESP
           BIND IPX TO AON325_1_ESP NET=55555

           LOAD AON325 FRAME=ETHERNET_II    NAME=AON325_1_EII
           BIND IPX TO AON325_1_EII NET=77777

   If problems occur during the binding process, your screen will prompt
   you with error messages. Please refer to your NetWare 386 manual for
   details on these messages.

                                                          -- End --
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.03