Driver Installation Guide for Windows NT 4.0
==================================================
Introduction
============
This document describes the procedure to install NDIS 4.0 driver on
Windows NT 4.0 for FriendlyNET PCI595 Fast Ethernet Adapter.
Location of Driver: \WINNT40\SISNIC.SYS
Installation Procedure
======================
1. Power off your PC and install the adapter in one of PCI slot.
2. Reboot the computer using the Windows NT operating system.
3. Double click the Network icon in the Control Panel.
4. Select the "Adapter" tab and click "Add..."
5. Select "Have Disk". Insert the FriendlyNET PCI595 drivers diskette
in your floppy drive and specify the correct path (e.g. A:\WINNT40),
then click OK.
6. Select one of the following models:
"FriendlyNET PCI595 Fast Ethernet Adapter"
then click OK.
7. In the dialog box that appears, select the Media Type and enter the
Network address for the adapter if necessary (You can click Help
for more detailed information about these settings).
Click "OK" to complete this dialog box (or Cancel to terminate the
configuration without completing it).
8. Exit the Network control panel window. Windows NT asks if you wish
to reboot.You must reboot before the adapter will function properly.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.