1. AF595_Win_1_11_DR.exe Driver
2. INSTALL.TXT File Contents

INSTALL.TXT Driver File Contents (AF595_Win_1_11_DR.exe)

          Driver installation Guide for NetWare DOS ODI Client
       ==========================================================

Introduction
============
    This document describes the procedure to setup the NetWare DOS ODI
    driver for FriendlyNET PCI595 Fast Ethernet Adapter.

    Location of Driver: \NETWARE\DOSODI\SIS900.COM


Installation Procedure
======================
 A. Setup Procedure for NetWare Client with NETX:
    ---------------------------------------------
    1. Copy SIS900.COM and relative files to specified directory:

       copy a:\NETWARE\DOSODI\*.*

    2. Edit or modify the NET.CFG file if necessary to select protocol
       and media type options.

    3. To connect to a server, use the following loading sequence:

       LSL
       SIS900
       IPXODI
       NETX
       LOGIN


 B. Setup Procedure for NetWare Client with VLM:
    --------------------------------------------
    The installation utility "INSTALL.EXE" is located on NetWare's
    "Workstation for DOS" disk. Run INSTALL.EXE from the Workstation
    for DOS Disk.
    The NetWare Client "Install" program screen will appear. You must
    complete each of the questions.These options are specific to your
    needs.

    1. Enter the destination directory for the NetWare Client.
       (The default directory is C:\NWCLIENT).

    2. Install will modify your AUTOEXEC.BAT and CONFIG.SYS files.
       Allow changes? (Y/N)

    3. Do you wish to install support for MS Windows ? (Y/N)
       (MS Windows Subdirectory: default C:\WINDOWS)

    4. Select the driver for your network board:
       a. Scroll the list to choose OTHER DRIVERS.
       b. Press <Enter>, and the "Insert The Driver Disk" dialog box
          will be prompted. Type the path to the directory which
          contain driver and information file. (A:\NETWARE\DOSODI)
       c. Press <Enter> and select target ODI driver.
       d. Select optional settings.
       e. Press "F10" to save.

    5. Press <Enter> to install

       Note:
       -----
       * Be sure to add LASTDRIVE=Z to your CONFIG.SYS file for the
         network mappings to work properly when using VLM.


 C. Set Media Type:
    ---------------
    1. Default is Auto-detect.

    2. Force media type.
       Modify Net.cfg

       Link Driver SIS900
           Mediatype     Type
           FRAME         ETHERNET_802.2
           FRAME         ETHERNET_802.3
           FRAME         ETHERNET_II
           FRAME         ETHERNET_SNAP


         Type       Ethernet Standard    Duplex
       --------     -----------------    ------
        AUTO          auto-detect         Auto
        UTP           10BASE-T            Half
        UTPFULL       10BASE-T            Full
        FAST          100BASE-T           Half
        FASTFULL      100BASE-T           Full