INSTALL.TXT Driver File Contents (AF595_Win_1_11_DR.exe)

             Driver installation Guide for NOVELL Client 32

    This document describes the procedure to install NetWare Client 32
    driver for FriendlyNET PCI595 Fast Ethernet Adapter.

    Location of Driver: \NETWARE\CLIENT32\SIS900.LAN

Installation Procedure
 A. Driver Installation Procedures on Clien32 for DOS:
    1. If you have completed installed the Netware Client 32 for DOS,
       all you have to do is to modify STARTNET.BAT. Please see the
       sample STARTNET.BAT above. If not, Please follow the next step 2
       to step 7.

    2. Run INSTALL.EXE from Netware Client 32 for DOS diskette 1 (or
       from Netware 4.11 CD). When the product manual appears, mark the
       "Netware Client 32 for DOS" item, then press <Enter>.

    3. Select "OTHER DRIVERS" item from "32-bit Network Board Drivers"
       menu, then press <Enter>.

    4. Insert FriendlyNET PCI595 Fast Ethernet Adapter Driver Diskette, then
       specify the driver path A: or B:

    5. Select "FriendlyNET PCI595 Fast Ethernet Adapter", then press <Enter>.

    6. Following instructions to complete the Client32 for DOS software

    7. Reboot your machine.

    Installing Multiple LAN Adapters:
    The keyword  "SLOT" is provided for multiple LAN adapters in a
    single server by the driver RTSSRV.LAN. So, add "SLOT" in LOAD
    commands. For example:

    LOAD SIS900 FRAME=Ethernet_802.2 SLOT=1
    LOAD SIS900 FRAME=Ethernet_802.2 SLOT=2

    Sample Configuration Files:
    STARTNET.BAT (Client 32 for DOS will contain):

    LOAD C:\NOVELL\CLIENT32\SIS900.LAN FRAME=Ethernet_802.3

 B. Driver Installation Procedures on Client32 for Windows 3.x:
    Refer to Content A. On step 2, mark "Netware Client 32 for DOS" and
    "Client 32 for Windows". On step 4, specify the driver path like
    A:\CLIENT32\SIS900.LAN, then following step 3..7 to complete the

 C. Driver Installation Procedures on Client 32 for Windows 95:
    If you have installed the Microsoft Client in your Windows 95 system,
    you should remove the adapter object and NDIS 2/3 drivers of FriendlyNET
    PCI595 adapter from the Windows 95 system.   If you have installed
    previously FriendlyNET PCI595 adpater NDIS 2/3 driver, you should do
    the following steps before installing  FriendlyNET PCI595 Fast Ethernet
    Adapter for Client-32 driver.

    Note:  If you never pluged FriendlyNET PCI595 Fast Ethernet Adapter
           into your PC,  Procedure C.1 is not necessary. And you just
           start from Procedure C.2

    C.1 Remove the previously installed adapter object & driver of
        FriendlyNET PCI595 Fast Ethernet Adapter, if any.
        1. Under Windows 95 system directory C:\WIN95\INF\, you should
           delete NETSIS.INF, *.BIN files.

        2. Click the "My Computer" icon in the Main Program Group.

        3. Click the "Control Panel" icon from My Computer window.

        4. Click the "System" icon from the Control Panel window.

        5. Click the "Device Manager" item.

        6. Click the "Network adapter" item from System window.

        7. Click the "FriendlyNET PCI595 Fast Ethernet Adapter" icon from
           System window.

        8. Click <Remove> button, then click <OK> button.

        9. Close the opened windows.

    C.2 Driver Installation on Client 32 for Windows 95:
        1. Plug FriendlyNET PCI595 Fast Ethernet Adapter into your PC machine.

        2. Turn the power on to bootup the Windows 95.

        3. Windows 95 will then prompt the "FriendlyNET PCI595 Fast Ethernet
           Adapter" in New Hardware Found dialog box.

        4. Following instructions to complete the installation, Window 95
           will ask you the proper path of the following diskette:
           - Netware Client 32 for Windows 95 Disk
           - FriendlyNET PCI595 Fast Ethernet Adapter Driver Diskette:
             Insert FriendlyNET PCI595 Fast Ethernet Adapter Driver Diskette,
             then assign the path to A:\NETWARE\CLIENT32
           - Windows 95 CD-ROM

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.86