Driver Installation Guide for MS Network Client
=====================================================
Introduction
============
This document describes the procedure to install driver on Microsoft
Network client for FriendlyNET PCI595 Fast Ethernet Adapter.
Location of Driver: \NDIS2\DOS\SIS900.DOS
Installation Procedure
======================
Before you start with the installation procedure, make sure that the
adapter is properly installed and configured. Similarly, Make sure
that your Microsoft Network Client is properly installed.
(If not, The installation utility SETUP.EXE is located on Microsoft
Network Client v3.0 for MS-DOS Disk. Run SETUP.EXE from Disk and the
SETUP program screen will appear, and you must complete each of the
questions. These options are specific to your needs. The installation
procedure will transfer files to a specific directory on the client
and modify existing configuration files to fit your specific needs.)
1. Change to the Microsoft Network Client subdirectory, and run
SETUP.EXE .
2. The screen will display some infomation. Press <Enter>.
3. Responds to the screen prompts, selecting "Change Network
Configuration", then press <Enter>.
4. Move the highlight to "Add Adapter", press <Enter>.
5. Select "Network adapter not shown on list below ...".
6. Insert the FriendlyNET PCI595 Fast Ethernet Adapter driver diskette
in floppy A, and specify your pathname A:\NDIS2\DOS, then press
<Enter>.
7. Follow screen instructions to complete the process. Simply pressing
<Enter> for each screen display will select the default options.
Press <Enter> until you reach the display prompting you to reboot
your system.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.