INSTALL.TXT Driver File Contents (AF595_Win_1_11_DR.exe)

	      Driver Installation Guide for IBM LAN Server

    This document describes the procedure to install driver on IBM LAN
    Server for FriendlyNET PCI595 Fast Ethernet Adapter.

    Location of Driver: \NDIS2\OS2\SIS900.OS2

Installation Procedure
 A. Installing driver for OS/2 LAN Server 4.x:
    Before you start with the installation process, make sure that OS/2
    LAN Server is properly installed.  Similarly,  your adapter should
    also be properly installed in your server.

    1. In OS/2 window, Click the "MPTS" icon.

    2. The screen will display the IBM Log, press "OK".

    3. Select "Install" button.

    4. Insert the driver disk, specify the driver path A:\NDIS2\OS2 and
       press <Enter>.

    5. When complete above step to load RTSND.OS2 into OS/2 system, then
       configure your system.

    6. The same step as step 3, select "Configure" button.

    7. The screen will display "Configure" dialog box and select "LAN
       adapters and protocols" then press "configure" button.

    8. The screen will display "LAPS Configuration" dialog box,  move
       highlight to "FriendlyNET PCI595 Fast Ethernet Adapter" item in
       "Network Adapter" window, and select "NetBios" protocol.
       Then, press "OK".

    9. Installation is complete now. Reset PC by turning it off and on.

       Installing Multiple LAN Adapters:
       a. follow [B]. 1-9 and add tow PCI595 Adapter driver

       b. in IBM Lan Services icon, OS/2 Lan Sercices

	  Select your the server of the insatlled, [OK].
	  Do you want to re-install this version. [No].
	  Installing tow card driver [OK] in mpts.
	  Configure a component. [OK]
	  Lan Services Adapters. [OK]
	  Configure. [OK]
	  Two Adapter [V]. OK

 B. Sample of configuration file:

    File Name:	    C:\CONFIG.SYS

    File Name:	    C:\IBMCOM\PROTOCOL.INI
    LANDD_nif	= LANDD.nif
    NETBEUI_nif = NETBEUI.nif
    ODI2NDI_nif = ODI2NDI.nif
    TCPIP_nif	= TCPIP.nif
    SIS900_nif	= SIS900.nif
    DriverName	  = LANDD$
    Bindings	  = SIS900
    DriverName	  = netbeui$
    Bindings	  = SIS900
    DriverName = odi2ndi$
    Bindings   = SIS900
    DriverName = TCPIP$
    Bindings   = SIS900
    DriverName = SIS900$

 C. Optional Parameters:
    SLOT       - This parameter specifies the slot number used for
		 notifications. For PCI slot, you can specify from 1 to

    MEDIATYPE  - This parameter specifies the media type currently used.
		 If MEDIATYPE does not specified, it will auto detect
		 the media type.

		 Parameters List:
		     AUTO     -- Auto-select media type.
		     UTP      -- 10BaseT half duplex mode.
		     UTPFULL  -- 10BaseT full duplex mode.
		     FAST     -- 100BaseT half duplex mode.
		     FASTFULL -- 100BaseT full duplex mode.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.81