1. AF595_Win_1_11_DR.exe Driver
2. INSTALL.TXT File Contents

INSTALL.TXT Driver File Contents (AF595_Win_1_11_DR.exe)

             Driver Installation Guide for DOS LAN Requester
          =====================================================

Introduction
============
    This document describes the procedure to install driver on IBM DOS
    LAN Requester for FriendlyNET PCI595 Fast Ethernet Adapter.

    Location of Driver: \NDIS2\DOS\SIS900.DOS


Installation Procedure
======================
 A. Installing driver for DOS LAN Requester of LAN Server 4.x:
    ----------------------------------------------------------
    Before you start with the installation process, make sure that DOS
    LAN Services is properly installed. Similarly, your adapter should
    also be properly installed in your client PC.

    1. Copy SIS900.DOS from your Driver diskette (\NDIS2\DOS) to LAN
       Services subdirectory C:\DLS .

    2. Under DOS LAN Requester subdirectory C:\DLS, run INSTALL.

    3. The screen display  some  description.  If it's correct,  move
       highlight to "The listed options are correct" item ,then press
       ENTER.

    4. Move highlight to "Network Card", then press ENTER.

    5. Select "Change driver for network card." item, then press ENTER.

    6. Select "Network card not shown in list below..", then press
       ENTER.

    7. Insert the driver diskette in floppy A, and specify the pathname
       A:\NDIS2\DOS, then press ENTER.

    8. SIS900.DOS NDIS driver is now installed on your computer, reboot
       your computer.


 B. Sample of configuration file:
    -----------------------------
    (Suppose the Lan Requester package is installed at C:\NET directory)

    File Name:    C:\CONFIG.SYS
    ----------
    DEVICE=C:\NET\PROTMAN.DOS /I:C:\NET
    DEVICE=C:\NET\DLSHELP.SYS
    DEVICE=C:\NET\SIS900.DOS

    File Name:    C:\AUTOEXEC.BAT
    ----------
    SHARE
    C:\NET\NET START
    C:\NET\NET START PEER
    C:\NET\NET SHARE ZZZ=C:\

    File Name:    C:\NET\PROTOCOL.INI
    ----------
    :
    # The followings are Custom Keywords. Put the keywords to enable
    # the special functions.
    [IBM$NETBEUI]
    DriverName=netbeui$
    SESSIONS=20
    NCBS=20
    BINDINGS=SIS900
    LANABASE=0
    :

    [SIS900]
    DriverName=SIS900$


 C. Optional Parameters:
    --------------------
    SLOT       - This parameter specifies the slot number used for
                 notifications. For PCI slot, you can specify from 1 to
                 16.

    MEDIATYPE  - This parameter specifies the media type currently used.
                 If MEDIATYPE does not specified, it will auto detect
                 the media type.

                 Parameters List:
                     AUTO     -- Auto-select media type.
                     UTP      -- 10BaseT half duplex mode.
                     UTPFULL  -- 10BaseT full duplex mode.
                     FAST     -- 100BaseT half duplex mode.
                     FASTFULL -- 100BaseT full duplex mode.