OEMSETUP.INF Driver File Contents (AF493_3_0_1_PC_DR.exe)

;
; OEMSETUP.INF File For AsanteFAST 10/100 PCI Rev B Adapter, v4.51
; 
[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    PCI
[Options]
    Pnic
[ConnectionChoicesPnic]
    Connect_0 = "AutoDetect" , 0
    Connect_1 = "TP_10" , 1
    Connect_2 = "TP_10+FullDuplex" , 2
    Connect_3 = "TP_100" , 3
    Connect_4 = "TP_100+FullDuplex" , 4
[TxThresholdChoicesPnic]
    TxThreshold_0 = "Store and Forward",0	
    TxThreshold_1 = "36 Bytes",1	
    TxThreshold_2 = "72 Bytes",2	
    TxThreshold_3 = "96 Bytes",3	
    TxThreshold_4 = "128 Bytes",4
    TxThreshold_5 = "160 Bytes",5	
    TxThreshold_6 = "256 Bytes",6	
[ConnectionChoicesPnicII]
    Connect_0 = "AutoDetect" , 0
    Connect_1 = "TP_10" , 4
    Connect_2 = "TP_10+FullDuplex" , 3
    Connect_3 = "TP_100" , 2
    Connect_4 = "TP_100+FullDuplex" , 1
[TxThresholdChoicesPnicII]
    TxThreshold_0 = "Store and Forward",0	
    TxThreshold_1 = "128 Bytes",128	
    TxThreshold_2 = "256 Bytes",256	
    TxThreshold_3 = "512 Bytes",512	
    TxThreshold_4 = "1024 Bytes",1024	
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "Asante"
ProductMajorVersion     = "4"
ProductMinorVersion     = "51"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

ProductSoftwareName     = "L100"
ProductSoftwareTitle    = "AsanteFAST 10/100 PCI Rev B Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\L100.sys"
NetRuleSoftwareType     = "L100Sys ndisDriver L100Driver"
NetRuleSoftwareUse        = $(SoftwareType)
NetRuleSoftwareBindForm = """L100Sys"" yes no container"
NetRuleSoftwareClass    = {"L100Driver basic"}
NetRuleSoftwareSWBindable = {"L100Driver PnicAdapter non exclusive 100"}

OptionHelpFile = "L100.hlp"
ProductHardwareName = "L100"

ProductHardwarePnicTitle = "AsanteFAST 10/100 PCI Rev B Adapter"
NetRuleHardwarePnicType  = "PNIC100 PnicAdapter"
NetRuleHardwarePnicClass = {"PnicAdapter basic"}
AdapterPnicType = 5   ;; PCI board

HelpPnicId = 30
PnicCFID = 135597    ;; 0x000211ad
PnicDevID = 2        ;; 0x0002
PnicVenID = 4525     ;; 0x11AD
ConnectionPnicIndexDefault=0    ; AutoDetect
TxThresholdPnicIndexDefault=6

HelpPnicIIId = 30
PnicIICFID = 3239383469    ;; 0xC11511AD
PnicIIDevID = 49429    ;; 0xC115
PnicIIVenID = 4525     ;; 0x11AD
ConnectionPnicIIIndexDefault=0    ; AutoDetect
TxThresholdPnicIIIndexDefault=512

NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
from        = ""
to          = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull           = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct        = ""
KeyParameters   = ""
TRUE                = 1
FALSE             = 0
NoTitle                = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath        = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media        = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status          = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
            goto returnoptions
	else
            set Status = STATUS_NOTSUPPORTED
            goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status           = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
	Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	    Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set Error = $($R0)
	    set from = end
	    set to = end
	    goto nonfatalinfo
	else
	    set StartLabel = configureadapter
        endif
    else
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
            Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
                  $(ProductVersion)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
            endif
            goto end
	else
            Shell $(UtilityInf), CardExistedDlg
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
            endif
            ifstr(i) $($R1) != "OK"
		set CommonStatus = STATUS_USERCANCEL
		goto end
            endif
            set OldVersionExisted = $(TRUE)
	endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
	Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Goto ShellCodeError
	Else-Ifstr(i) $($R0) == STATUS_FAILED
	    Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set Error = $($R0)
            Goto fatal
	Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	    Goto successful
	Endif
	Set SrcDir = $($R1)
	install "Install-Hlp"
    endif
    Goto installproduct
configureadapter = +
    Ifstr(i) $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Goto fatalregistry
	Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
	Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
	set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
	set ValueItem = $($)
	set ValueName = *($(ValueItem),1)
	set ValueData = *($(ValueItem),4)
        Ifstr(i) $(ValueName) == "AdapterCFID"
            Ifint $(ValueData) == $(PnicCFID)
                set MacID = "Pnic"
            else
                set MacID = "PnicII"
            endif
        else-ifstr(i) $(ValueName) == "ConnectionType"
            set ConnectionIndex = $(ValueData)
	else-ifstr(i) $(ValueName) == "TxThreshold"
	    set TxThresholdIndex = $(ValueData)
	endif
    EndForListDo
    read-syms FileOptionsDlg$(!STF_LANGUAGE)
    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
    ifstr(i) $(ConnectionValue) == ""
	set ConnectionValue = *($(ConnectionList), 2)
    endif
    set TxThresholdValue = *($(TxThresholdList), ~($(TxThresholdValues),$(TxThresholdIndex)))
    ifstr(i) $(TxThresholdValue) == ""
	set TxThresholdValue = *($(TxThresholdList), 2)
    endif
adapteroptions = +
    set from = adapteroptions
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(MacID)Id)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set ConnectionIndex = $(Combo1Out)
        set TxThresholdIndex = $(Combo2Out)
	ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
	set CommonStatus = STATUS_USERCANCEL
	ui pop 1
	goto end
    else
	set CommonStatus = STATUS_USERCANCEL
	ui pop 1
	goto end
    endif
    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
    set TxThresholdValue = *($(TxThresholdValues), ~($(TxThresholdList),$(TxThresholdIndex)))
    ifstr(i) $(!NTN_InstallMode) == configure
	goto updateparameters
    endif
installproduct =+
    StartWait
    set AdapterList = {}
    Shell $(UtilityInf), GetPCIInformation, $(PnicVenID) $(PnicDevID)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R0) != {}
        ForListDo $($R0)
            set AdapterList = >($(AdapterList), {$($), "Pnic"})
        EndForListDo
    endif
    Shell $(UtilityInf), GetPCIInformation, $(PnicIIVenID) $(PnicIIDevID)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R0) != {}
        ForListDo $($R0)
            set AdapterList = >($(AdapterList), {$($), "PnicII"})
        EndForListDo
    endif
    ifstr(i) $(AdapterList) == {}
        set Error = $(CANNOT_FIND_ANY_CARD)
        set CommonStatus = USER_CANCEL
        set from = end
        goto nonfatal
    endif
    ifint $(OldVersionExisted) == $(FALSE)
        Ifstr(i) $(DoCopy) == "YES"
            Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
            Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Goto ShellCodeError
            Else-Ifstr(i) $($R0) == STATUS_FAILED
                Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                set Error = $($R0)
                Goto fatal
            Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                Goto successful
            Endif
            Set SrcDir = $($R1)
        Endif
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set Error = $($R0)
            goto fatal
        endif
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
	    $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
	    $(NetEventDLL)
	Set OEM_ABANDON_SOFTWARE = TRUE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $($R1)
	    CloseRegKey $($R2)
	    CloseRegKey $($R3)
	    CloseRegKey $($R4)
	    CloseRegKey $($R5)
	    goto fatalregistry
	endif
	Set SoftProductKey        = $($R1)
	Set SoftNetRuleKey        = $($R2)
	Set SoftServiceKey        = $($R3)
        Set SoftParameterKey      = $($R4)
	Set SoftLinkageKey        = $($R5)
	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
			   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
			   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
			   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
			   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
			   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
			   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $(SoftProductKey)
	    CloseRegKey $(SoftNetRuleKey)
	    CloseRegKey $(SoftServiceKey)
	    CloseRegKey $(SoftParameterKey)
	    CloseRegKey $(SoftLinkageKey)
	    goto fatalregistry
	endif
	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
			    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	CloseRegKey $(SoftProductKey)
	CloseRegKey $(SoftNetRuleKey)
	CloseRegKey $(SoftServiceKey)
	CloseRegKey $(SoftParameterKey)
	CloseRegKey $(SoftLinkageKey)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    goto fatalregistry
	endif
    endif
    ForListDo $(AdapterList)
        set BusNum = *(*($($),1),1)
        set DeviceNum = *(*($($),1),2)
        set FunctionNum = *(*($($),1),3)
	set MacID = *($($),2)
	Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
	    $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	ifstr $($R0) != "NO_ERROR"
	    set Error = $($R0)
	    goto fatal
	endif
        read-syms FileOptionsDlg$(!STF_LANGUAGE)
	ifstr(i) $($R1) != "YES"
            set ConnectionIndex = $(Connection$(MacID)IndexDefault)
            set TxThresholdIndex = $(TxThreshold$(MacID)IndexDefault)
            ifstr(i) $(!STF_GUI_UNATTENDED) != "YES"
                set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
                set TxThresholdValue = *($(TxThresholdList), ~($(TxThresholdValues),$(TxThresholdIndex)))
                read-syms FileDependentDlg$(!STF_LANGUAGE)
                SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(MacID)Id)
                ui start "InputDlg"
                ifstr(i) $(DLGEVENT) == "CONTINUE"
                    set ConnectionIndex = $(Combo1Out)
                    set TxThresholdIndex = $(Combo2Out)
	            ui pop 1
                else-ifstr(i) $(DLGEVENT) == "BACK"
		    set CommonStatus = STATUS_USERCANCEL
                    ui pop 1
                    goto end
                else
                    set CommonStatus = STATUS_USERCANCEL
                    ui pop 1
                    goto end
                endif
                set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
                set TxThresholdValue = *($(TxThresholdValues), ~($(TxThresholdList),$(TxThresholdIndex)))
            else
                set ConnectionValue = $(ConnectionIndex)
                set TxThresholdValue = $(TxThresholdIndex)
            endif
	    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
	    ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
	    endif
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set RegistryErrorIndex = $($R0)
	    Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
		EndWait
		CloseRegKey $($R1)
		CloseRegKey $($R2)
		CloseRegKey $($R3)
		goto fatalregistry
	    endif
	    Set HardNetCardKey        = $($R1)
	    Set HardNetRuleKey        = $($R2)
            Set HardParameterKey      = $($R3)
            set AdapterNumber         = $($R4)
	    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
				{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
				{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
				{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
				{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
				{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	    Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set BusTypeNum = 5
	    set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
				{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {ConnectionType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {TxThreshold,$(NoTitle),$(!REG_VT_DWORD),1},+
				{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
				{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(MacID)CFID)}}
	    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
            set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
                                {TxThreshold,$(NoTitle),$(!REG_VT_DWORD),$(TxThresholdValue)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
	    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
	    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
				{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
				{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
				{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	    Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    CloseRegKey $(HardNetCardKey)
	    CloseRegKey $(HardNetRuleKey)
	    set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
				{Slot,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
				{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
	    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
	    CloseRegKey $(HardParameterKey)
	endif
    EndForListDo
    EndWait
    goto successful
updateparameters =+
    set HardParameterKey    = $($R3)
    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
                        {TxThreshold,$(NoTitle),$(!REG_VT_DWORD),$(TxThresholdValue)}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    CloseRegKey $(KeyParameters)
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    else
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $(!NTN_RegBase)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
        endif
	set !UG_Filename = $($R0)
	install "Install-Update"
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	    goto fatal
	endif
	SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
	CloseRegKey $(KeyProduct)
    else
	goto fatalregistry
    endif
    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType        = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
        set !STF_NCPA_FLUSH_COPYLIST = TRUE
        CopyFilesInCopyList
    endif
    Exit
[Install-Hlp]
    set STF_VITAL = ""
    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    Exit
[Install-Update]
    set STF_VITAL          = ""
    set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    exit
[Source Media Descriptions]
    1  = "AsanteFAST 10/100 PCI Rev B Adapter Driver Disk"
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
1,Oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[Files-Pnic]
1,L100.SYS
[Files-Hlp]
1,L100.hlp
[LanguagesSupported]
    ENG
[OptionsTextENG]
    Pnic  = "AsanteFAST 10/100 PCI Rev B Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
		 "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "AsanteFAST 10/100 PCI Rev B Adapter Driver"
FunctionPnicTitle = "AsanteFAST 10/100 PCI Rev B Adapter Setup"
ProductHardwarePnicDescription = "AsanteFAST 10/100 PCI Rev B Adapter"

NoList  = ^(NoChoices, 2)
NoValues = ^(NoChoices, 4)
ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText        = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"
[DialogConstantsENG]
Help          = "&Help"
Exit          = "Cancel"
OK            = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel        = "Cancel"
[FileOptionsDlgENG]
ConnectionList  = ^(ConnectionChoices$(MacID), 1)
ConnectionValues = ^(ConnectionChoices$(MacID), 2)
TxThresholdList  = ^(TxThresholdChoices$(MacID), 1)
TxThresholdValues = ^(TxThresholdChoices$(MacID), 2)
[FileDependentDlgENG]
DlgText = "Choose the proper cable type for the "+
	  "network adapter. Select [Help] for a detailled "+
	  "description of the available options of the list."
DlgTemplate = "TWO_COMBO"
DlgType = "Combination"
Caption = $(Function$(Option)Title)
Combo1Label = "&ConnectionType:"
Combo1List = $(ConnectionList)
Combo1Out  = $(ConnectionValue)
Combo2Label = "&TxThreshold:"
Combo2List = $(TxThresholdList)
Combo2Out  = $(TxThresholdValue)

ComboListItemsIn  = {Combo1List,Combo2List}
ComboListItemsOut = {Combo1Out,Combo2Out}

EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 10
MaxHelpId = 1140
HelpContext = $(Help$(MacID)Id)

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.09