DOSLAN.TXT Driver File Contents (aon101v2.1.zip)

   DOS LAN Service

   Introduction:
   -------------
   This document describes the procedure to install NDIS driver on DOS
   LAN service for AOpen AON-101 10M ISA PnP Ethernet Adapter.

   Location of Driver:  \NDIS2\DOS\AN101.DOS  (for DOS LAN Service)


   Installing driver procedure on DOS LAN Service :
   --------------------------------------------------
      Before you start with the installation process, make sure that
      DOS LAN Services is properly installed. Similarly, your adapter
      should also be properly installed in your client PC.

      1. Copy AN101.DOS from your Driver diskette (A:\NDIS2\DOS) to DOS
         LAN Services subdirectory C:\NET .

      2. Under DOS LAN Service subdirectory C:\NET, run INSTALL

      3. The screen display some description. If it's correct, move
         highlight to "The listed options are correct" item ,then press
         ENTER.

      4. Move highlight to "Network Card", then press ENTER.

      5. Select "Change driver for network card." item, then press ENTER.

      6. Select "Network card not shown in list below..", then press ENTER.

      7. Insert the AOpen AON101 driver diskette in floppy A, and
         specify the pathname A:\NDIS2\DOS, then press ENTER.

      8. AOpen AON101 driver is now installed on your computer, reboot
         your computer.

      NOTES:
      ------
          Parameters for the PROTOCOL.INI file:

          AdapterID : This keyword is provided by AON101, and is required
                      when more than one AON101 adapters exist on one
                      system.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.10