9/9/1998 SCO UNIX 5.0.x AcerLAN ALN-101 MDI Driver ================================================== NOTES: Before install the driver, you must use "acerset.exe" to change the PNP mode into the Jumpless mode. The following files will be used in this installation: Files Contents ----------- ----------------------------------------- Driver.o ALN-101 MDI Driver Program setup Transfer dos format to unix format setup program Master Used by netconfig System Used by netconfig Node Used by netconfig Space.c Used by netconfig space.h Used by netconfig lkcfg Used by netconfig r2e Used by netconfig 1. Installation Diskette in DOS format. Put ALN-101 SCO UNIX Driver diskette to floppy A: and use doscp command to copy ALN-101 SCO UNIX Driver into UNIX's directories. # cd / # doscp a:/sco5/setup /setup # chmod +x /setup # ./setup 2. Use netconfig utility Avaiable options: # netconfig 3. To add adapters, select "Add New Lan Adapter" from "Hardware". 4. Select "AcerLAN ALN-101 Ethernet Adapter Driver" from list. NOTES: If you ever used old ALN-101 driver, you can find the description "AcerLAN ALN-101 PnP Ethernet Adapter Driver, board 0". Now please ignore it or you also can remove it from list using below method: # cd /usr/lib/netconfig/info # rm r0e0 5. Add Protocol to select SCO TCP/IP. 6. Enter the internet Address of this interface n.n.n.n 7. Enter the netmask for this interface (default 255.255.255.0) 8. Enter the boardcast address for this interface default: n.n.n.n 9. Do you want to relink to kernel now ? y 10. Do you want this kernel to boot by default (y/n) y 11. Do you want the kernel environment rebuilt (y/n) y 12. Reboot unix # rebootDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.