Installing the Relia PCMCIA Ethernet Card driver
Under WFW 3.11
==================================================
The NDIS driver for Windows for Workgroups 3.11 follows Microsoft's
NDIS specification version 2.0.1
The PCMCIA Ethernet adapter device driver files for MS Windows for
Workgroups contained in this directory are as follows:
Files Contents
------------- -----------------------------------------------------
PCMND.DOS NDIS driver for WFW 3.11.
OEMSETUP.INF Network information for installation.
\DISK1 For OEMSETUP.INF.
This driver diskette includes an OEMSETUP.INF file for WFW. Using the
OEMSETUP.INF file, you can select the PCMCIA Ethernet adapter to be
installed through the Windows dialog box menus.
If you are installing Windows for Workgroups for the first time, we
advise you to run the SETUP program with /I option (ignore hardware
detection):SETUP/I. If you don't use the /I option, the computer may
hang during installation. If this happens, reboot the machine, and
run the SETUP program again.
For more information about setting up Windows and the networking
system, please see you MS Windows for Workgroups documentation.
**********************************
* Installation Procedure Steps *
**********************************
If you are first time installing WFW, when asked for the "Install New
Network Adapter" menu, please go to following step 2 and answer
questions. If you have already installed WFW, you can go to the
"Network => Network Setup" menu and answer the following questions.
1. From within Windows of Network, run the "Network Setup" dialog box,
Choose "Networks..." button.
Choose "Driver..." button.
Choose "Add Adapter..." button.
2. When asked for a network adapter to install, Select "Unlisted or
Updated Network Adapter".
3. Insert this diskette into drive "A".
4. When asked for the path of UPDATED OR VENDOR-PROVIDED NETWORK
DRIVER file, Type
A:\NDIS2\WFW311
5. Select the "Relia PCMCIA Ethernet Card" choice.
6. You need to specify IRQ and I/O settings, which must be equal to
the /IRQ and /IO parameters specified to the enabler program.
7. Restart your computer so that the updates will take effect.
Note: After WFW finishes the setup for the Reila PCMCIA Ethernet
Adapter, it will modify your CONFIG.SYS, AUTOEXEC.BAT, and
PROTOCOL.INI files.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.