Installing the Relia PCMCIA Ethernet Card driver
Under WFW 3.1
==================================================
The NDIS driver for Windows for Workgroups 3.1 follows Microsoft's
NDIS specification version 2.0.1.
The PCMCIA Ethernet adapter for Windows for Workgroups device driver
files contained in this directory are as follows:
Files Contests
------------- -----------------------------------------------------
PCMND.DOS NDIS driver for WFW 3.1.
OEMSETUP.INF Network information for install file.
\DISK1 For OEMSETUP.INF.
This driver diskette includes an OEMSETUP.INF file for WFW. Using the
OEMSETUP.INF file, you can select the PCMCIA Ethernet Card to be
installed through the Windows dialog box menus.
If you are installing Windows for Workgroups for the first time, we
advise you to run the SETUP program with /I option (ignore hardware
detection): SETUP/I. If you don't use the /I option, the computer may
hang during installation. If this happens, reboot the machine, and
run the SETUP program again.
For more information about setting up Windows and the networking
system, please see your Windows for Workgroups documentation.
**********************************
* Installation Procedure Steps *
**********************************
If you are installing WFW for the first time, when prompted with the
"Install New Network Adapter" menu, please go to following 'step 2'
and answer questions. If you have already installed WFW, you can go
to the "Main => Control Panel => Network => Adapters" menu and answer
the following questions.
1. In "Network Adapters" dialog box, choose the "Add..." button.
2. When asked for the name of new network card, select "Unlisted or
Updated Network Adapter".
3. Insert this diskette into drive "A".
4. When asked for the path of VENDOR-PROVIDED driver file, type
A:\NDIS2\WFW31
5. Select the "Relia PCMCIA Ethernet Card" choice.
6. You need to specify IRQ and I/O settings, which must be equal to
the /IRQ and /IO parameters specified to the enabler program.
7. After WFW finishes the setup for the driver, it will modify your
CONFIG.SYS, AUTOEXEC.BAT and PROTOCOL.INI files.
8. Restart your computer so that the updates will take effect.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.