1. relia_re2408.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (relia_re2408.zip)

               Installing the Relia PCMCIA Ethernet Card driver
                        Under LAN MANAGER 2.x for OS/2
              ==================================================

    The NDIS2 driver for OS/2 program compiles with Microsoft's NDIS 
    specification version v2.0.1

    The PCMCIA Ethernet Card driver files for MS LAN Manager contained in 
    this directory are as follows:

    Directory/Files                         Contents
    -----------------------------------     -------------------------------
    DRIVERS\ETHERNET\PCMND\PCMND.OS2        NDIS driver for OS/2.
    DRIVERS\ETHERNET\PCMND\PROTOCOL.INI     Includes driver binding 
                                            information and operational 
                                            parameters.
    DRIVERS\NIF\PCMND.NIF                   Network information file for 
                                            install.

    For more information about setting up the networking system and the 
    driver, please see you MS LAN Manager Installation and Configuration 
    Guide.   


    **********************************
    *  Installation Procedure Steps  *
    **********************************

    1. MS LAN Manager provides a SETUP.EXE program on the Setup disk.  
       Execute this SETUP program to specify the proper driver.

        - If you are installing LAN Manager for the first time, run the 
          SETUP program to install LAN Manager.  Near the end of the 
          installation, you will be asked select available network adapter 
          drivers.  please select "Other Driver" button.

        - If you have already installed LAN Manager, run the SETUP program 
          in OS2 screen, and go to "Configuration => Network Drivers => Add
          New Config => Other Drivers" button.

    2. Insert this diskette into drive 'A' and type the path as A:\, The
       SETUP program will copy the necessary NDIS driver programs to your 
       \MSLANMAN.OS2 directory.

    3. After completion of the SETUP, it will modify your CONFIG.SYS, 
       AUTOEXEC.BAT and PROTOCOL.INI files.

    4. After completion of the SETUP, you should modify the PROTOCOL.INI 
       file to specify the IRQ number and the IOBASE number which must be
       equal to the /IRQ and /IO parameters specified to the enabler 
       program.

    5. Shutdown your OS2 system, then reboot your computer.



How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.