1. 8022.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (8022.exe)

              Standard Microsystems Corporation

             SMC8022T  EZ PCMCIA 10Base-T Adapter
             SMC8022BT EZ PCMCIA Combo Adapter
                  
             NDIS Driver for Microsoft Windows 95

File Descriptions:

   SMC8022N.SYS:      Microsoft Windows 95 NDIS3 driver
   README.TXT:       This file


Windows 95 (Release 950 and 950a) installation procedure: 

   1. Insert the SMC EZ PCMCIA Adapter into a PCMCIA slot on
      your notebook.  The system displays the "New Hardware Found"
      window, with "SMC-EZCard-10-PCMCIA" as the device  name.

   2. Select "Drivers from disk provided by hardware manufacturer."

   3. At the "Install From Disk" window, enter the drive letter
      and path where the device information file (.INF file) can
      be found (e.g.  A:\).  Press "OK".  The system then installs
      the driver automatically.

   4. If the system asks for files from the Windows 95 CD-ROM, 
      please specify the location of it.  Follow the prompt until 
      the installation is complete.

   5. Reboot the machine to start the network.

Windows 95 OSR2 (Release 950 B) installation procedure: 

   1. Insert the PC card into a PCMCIA slot.  Wait for the "New 
      Hardware Found" window to appear, with "SMC-EZCard-10-PCMCIA" 
      displayed as the device name.

   2. The "Update Device Driver Wizard" window appears, with the 
      message "This wizard will complete the installation of:
      SMC-EZCard-10-PCMCIA."  Click the "Next>" button.

   3. Windows 95 then asks for the location of the driver.  Click 
      on "Other Locations."  The "Select Other Location" dialog
      box appears.  Enter "A:\" and click OK.

   4. The "Update Device Driver Wizard" window shows up again, with 
      the message "Windows found the following updated driver for
      the device: SMC EZ PCMCIA Adapter." Click the "Finish" 
      button.

   5. Windows 95 asks for the location of the SMC8022.INF file.
      Enter "A:\" in the dialog box, and click OK.
	   
   6. The system starts to copy the driver files from the driver 
      diskette to system directories on the hard disk.  If the 
      system asks for files from the Windows 95 CD-ROM, please 
      specify the location of it.  Follow the prompt until the 
      installation is complete.

   7. In Control Panel, select the Network icon.  If the desired
      clients (e.g. Client for Microsoft Networks) are not
      installed, please install them.

   8. Shutdown and restart Windows 95 to take effect the change.

Trademarks:
Microsoft Windows 95 is a trademark of Microsoft Corporation.