;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; WWDSLCFG.INI ;; ;; Copyright 2000-2002 GlobeSpanVirata, Inc. ;; DJG 19-06-02 ;; Contains custimization parameters for the GlobeSpan ADSL Setup application. ;; This file must reside in the Windows Directory. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [SystemInfo] Version=1.24.2 ; Location of registry key where setup information will be stored SetupSoftwareKey=Zoom\Adsl ; Location of installed program files, if any, on the windows drive ProgramFilesDir=\Program Files\Zoom\Adsl Manufacturer=Zoom ; Name in start menu and control panel add/remove ProductName=Zoom DSL Modem ; Caption in main installer window MainCaption=Zoom DSL Modem ; If 1, should show the full-screen background window ShowBackgroundWindow=1 ; Title of full-screen installer window BackgroundTitle=Zoom DSL Modem ; Font size of BackgroundTitle BackgroundTitleSize=24 ; Color of BackgroundTitle font BackgroundTitleClrRed=255 BackgroundTitleClrGreen=255 BackgroundTitleClrBlue=255 ; Color of installer window background BackgroundClrRed=146 BackgroundClrGreen=81 BackgroundClrBlue=49 ; Specifies if installer background should have gradient effect (1 if gradient, ; 0 if solid) BackgroundGradient=1 ; PCI or USB HardwareType=USB ; HardwarePlatform can be: ANCHOR, QUASAR, IAD, PULSAR, PANDA HardwarePlatform=ANCHOR ; Vendor and Device ID (matches ID's programmed into device). Separate ; multiple values by commas to support multiple device codes ; Must prepend class (USB\ or PCI\) UsbCtrlrId=USB\VID_0547&PID_2131,USB\VID_0915&PID_0001 ModemId=USB\VID_0915&PID_8000,USB\VID_0915&PID_0002 ; Vendor ID transmitted in EOC status request (in hex) EocId=39 ; If 1, welcome screen will be skipped. If 0, it will be shown. SkipWelcomeScreen=0 ; If 1, license agreement screen will be skipped. If 0, it will be shown, ; and will use the license.txt SkipLicenseScreen=1 ; If 1, the ISP selection screen will be skipped, and if 0, it will be shown. ; If skipped, the parameters will be obtained from the Default section. SkipIspSelectionScreen=0 ; If 1, the summary screen will be skipped, and if 0, it will be shown. SkipSummaryScreen=0 ; If 1, the finished screen will be skipped, and if 0, it will be shown. SkipFinishedScreen=0 ; This string must match the caption of the control panel window CplWindowName=Zoom DSL Modem ; Allow the user to enter control panel's debug mode (1 is enable, 0 is disable) AllowCplDebugMode=1 ; Create a shortcut in the start menu to the control panel (1 is enable, 0 is disable) CreateCplStartMenuShortcut=0 ; Uses installation method where the first reboot is avoided on win9x. This ; method changes the inf file which might have certification implications. ; Win2K never needs a reboot so this flag is ignored. SkipWin9xReboot=1 ; If set to 0, there will be no reboots during installation on Win2k. ; However, the TCP window size will not be set properly without a reboot. ; If set to 1, the system will be rebooted after installation. Win2kReboot=1 ; The name of a file in the ProgramFiles directory that will get spawned ; when the Support button is pressed. If this feature is not needed, ; erase everything after the equal sign and remove the support button ; from the language resource file. SupportFile=support.htm SupportParam= ; The following values will specify which files get spawned when the user ; clicks the various help buttons. The values that end in "File" specify ; the name of the file that will get spawned. These files must reside in ; the ProgramFiles directory. The values that end in "Params" will ; pass the specified string as an argument to the file. To disable this ; feature, erase everything after the equal signs, and remove the help ; button from maintenance window in the resource file. ; ; In the following, HelpMaintenance is for the maintenance dialog box ; that is shown when the start menu icon is clicked. IspSelect is for ; the ISP selection screen. DriverType is for the driver selection screen. ; Settings is for the communication settings dialog. HelpMaintenanceFile=Help.htm HelpMaintenanceParam= HelpIspSelectFile= HelpIspSelectParam= HelpDriverTypeFile= HelpDriverTypeParam= HelpSettingsFile= HelpSettingsParam= ; If set to 1, enables the maintenance dialog box after installation. This ; dialog contains the update, remove, settings, support, and help buttons. ; If set to 0, this box will never be shown. Instead, icons in the start ; menu will be provided to directly launch the update, remove, and settings ; functions. EnableMaintenanceDlg=1 ; The minimum VCI value that the configuration dialog box will accept MinVci=32 MaxVci=65535 ; Specifies if the "Other Isp" item will be added to the ISP list ShowOtherIspChoice = 1 ; If the "Other Isp" item is shown in the ISP list, this specifies if it ; should be placed at the beginning or the end of the list OtherIspAtEnd = 1 EnableHardDriveDma = 0 ; A comma-deliminated list of file names. Each file will be removed ; from the windows system directory during uninstall. On 2k these files ; will also be removed during reboot in case they were locked by the OS. RemoveFromWinSysDir= ; This value determines the reboot behavior in Win95. Possible values are: ; SHUTDOWN - System prompts for a shutdown (recommended) ; REBOOT - System prompts for a reboot ; REBOOTNOPROMPT - System reboots without asking (not recommended) Win95RebootMode = SHUTDOWN ; If set to 1, this flag will reboot the system without showing ; a prompt first (during installation). Prompts to shutdown are still shown. SuppressRebootPrompts = 0 ; This parameter contains the resource id of a dialog box in the language dll ; resource table that will be displayed for 5 seconds when the system ; is rebooting. If 0, no dialog box will be shown. This is only applicable ; if SuppressRebootPrompts = 1. RebootMsgDlgId = 0 ; This flag determines if the company logo in the control panel is transparent. ; If 1, it is transparent and the upper-left-hand corner pixel will be used ; as the transparent color. If 0, the company logo will be solid. MakeCplLogoTransparent = 1 ; The VPI/VCI is usually communicated to the driver through the phone number ; in dialup networking (for wan and atm). If this flag is set to 1, ; the phone number is ignored, and the VPI/VCI will give the driver the values ; through the registry. IgnoreDialupPhoneNumber = 0 ; This flag determines if the installer will disable the driver certification ; warning on Windows 2000 and WinXp. ; 1 - The warnings will be suppressed ; 0 - The warnings will not be suppressed DisableWin2kWarning = 0 ; This value sets the driver's frame size if PPPoE encapsulation is selected. PppoeFrameSize = 1492 ; If set to 1, this flag does not show the hardware detected dialog box. SuppressHwDetectDlg = 0 ; Comma-delimited list of sections that describe a start-menu icon. ; Each icon will point to a file installed in the program files directory ;StartMenuIconSections=StartMenuSampleDoc ; Comma-delimited list of ISP sections. Do not include IspDefault. IspSections=IspWiresonly Debug=ERROR ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [StartMenuSampleDoc] ; File in ProgramFilesDir to point to FileName=testdoc1.doc Description=Sample Document ; 1 if a shortcut should be created on desktop ShortcutToDesktop=1 ; ------------------------------------------------------------------------- ; ISP DESCRIPTIONS ; ------------------------------------------------------------------------- ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ; Description of fields: ;; ;; ; DriverLocation points to a directory under PCI or USB. This must match ;; ; the directory name exactly. ;; ; Default directory names are (under drivers): ;; ; WAN Driver ;; ; ATM Driver ;; ; LAN Driver ;; DriverLocation=WAN Driver ;; ;; ; Default VPI/VCI ;; VPI=0 ;; VCI=88 ;; ;; ; Layer 3 Protocol ;; ; 1 - RFC 1577 Classical IPoATM (Lan Driver only) ;; ; 2 - RFC 1483 IPoATM Bridged LLC Encapsulation (Lan Driver only) ;; ; 3 - RFC 1483 IPoATM Bridged VC Encapsulation (Lan Driver only) ;; ; 4 - RFC 1483 IPoATM Routed LLC Encapsulation (Lan Driver only) ;; ; 5 - RFC 1483 IPoATM Routed VC Encapsulation (Lan Driver only) ;; ; 6 - RFC 2364 PPPoATM LLC Encapsulation (WAN and ATM Drivers only) ;; ; 7 - RFC 2364 PPPoATM NULL Encapsulation (WAN and ATM Drivers only) ;; ; 8 - RFC 2516 PPPoE Encapsulation (WAN USB Driver only) ;; Layer3Protocol=7 ;; ;; ; Modulation ;; ; 0 - T1.413 ;; ; 1 - G.Lite ;; ; 2 - G.DMT ;; ; 4 - Multimode ;; ; 14 - Alcatel Annex-B ;; Modulation=4 ;; ;; ; Displayed in service provider selection drop list ;; Description=Zoom ;; ;; ; Show a status icon in the system tray (1 shows icon, 0 doesn't) ;; ShowSysTrayIcon=1 ;; ;; ; If a file is specified here, it will be executed after the installation ;; ; process finishes. The file must be located in the ProgramFiles directory ;; ; of the installation media. If no file is present, nothing will be executed. ;; RunOnExit=myapp.exe ;; ;; ; If 1, a dial-up icon will be created for this ISP. If 0, no dial-up ;; ; icon will be created. ;; CreateDialup=1 ;; ;; ; Name that is shown for the dial-up icon, if created. ;; DialUpName=GlobespanVirata Dial-Up PPP Connection ;; ;; ; If 1, a shortcut to the dial-up icon will be created on the desktop. ;; ; If 0, no shortcut will be created. ;; CreateDialupDeskShortcut=1 ;; ;; ; If 1, a shortcut to the dial-up icon will be created in the start menu. ;; ; If 0, no shortcut will be created. ;; CreateDialupMenuShortcut=0 ;; ;; ; Specifies an icon for the shorcut to the dial-up networking. A value ;; ; of -1 specifies the default icon to be used. Any other value specifies ;; ; an icon located in the language dll. 0 means the first icon in the dll. ;; DialupShortcutIconIndex=-1 ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; The default ISP section is used if the user selects "Not Listed" from ISP ; list [IspDefault] DriverLocation=WAN Driver VPI=0 VCI=38 Layer3Protocol=7 Modulation=4 Description=Zoom CreateDialup=1 ShowSysTrayIcon=1 RunOnExit= DialUpName=Zoom Dial-Up PPP Connection CreateDialupDeskShortcut=1 CreateDialupMenuShortcut=0 DialupShortcutIconIndex=-1 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [IspWiresonly] DriverLocation=WAN Driver VPI=0 VCI=38 Layer3Protocol=7 Modulation=4 Description=Self Install ADSL (UK) CreateDialup=1 ShowSysTrayIcon=1 RunOnExit= DialUpName=ADSL PPP Connection CreateDialupDeskShortcut=1 CreateDialupMenuShortcut=0 DialupShortcutIconIndex=-1Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.