[Version] LayoutFile=layout.inf Signature = "$Windows NT$" Provider=%VIA% Class=Infrared ClassGUID = {6bdd1fc5-810f-11d0-BEC7-08002BE2092F} DriverVer = 11/20/2001,1.20.0000.1 CatalogFile=viairda.cat [SourceDisksNames] ; floppy only 1 =%DiskDescription%,, ; floppy only [SourceDisksFiles] ; floppy only viairda.sys = 1 ; floppy only viafir2k.inf = 1 ; floppy only [DestinationDirs] ; ; Specify destination directories for groups of files. ; '12' indicates the Windows System32\drivers directory. ; DefaultDestDir=12 VIA_Drivers=12 VIA_CopyFiles=12 [Manufacturer] ; ; Specify a name and devices section for each supported manufacturer that ; makes products of this class. ; "VIA Technologies, Inc."=VIA_Devices [VIA_Devices] ; ; This section describes the devices of this class made by a particular ; manufacturer. ; The first descriptor, delimited by '%', is a symbolic string whose actual ; value is given in the [Strings] section below. ; %VIA3058.DeviceDesc% = VIA3058.ndi,*VIA3058 ; VIA Device %VIA3076.DeviceDesc% = VIA3076.ndi,*VIA3076 ; VIA Device [VIA3058.ndi] SyssetupPnPFlags=1 ; ; This section describes how to install a particular device. ; It names other sections which detail the registry changes ; that need to be made and the files that need to be copied. ; DeviceID=*VIA3058 DelReg=VIA_DelReg AddReg=VIA_AddReg,IR3058_AddReg,Dongle_Addreg,MAXSPEED_AddReg,Help_AddReg MaxInstance=1 BusType = 14 Characteristics = 0x4 ; NCF_PHYSICAL CopyFiles=VIA_CopyFiles [VIA3076.ndi] SyssetupPnPFlags=1 ; ; This section describes how to install a particular device. ; It names other sections which detail the registry changes ; that need to be made and the files that need to be copied. ; DeviceID=*VIA3076 DelReg=VIA_DelReg AddReg=VIA_AddReg,IR3076_AddReg,Dongle_Addreg,MAXSPEED_AddReg,Help_AddReg MaxInstance=1 BusType = 14 Characteristics = 0x4 ; NCF_PHYSICAL CopyFiles=VIA_CopyFiles [VIA3058.ndi.Services] AddService= VIAIRDA, 2, VIAIRDA.AddService, common.EventLog [VIA3076.ndi.Services] AddService= VIAIRDA, 2, VIAIRDA.AddService, common.EventLog [VIA3058.ndi.Coinstallers] DelReg=VIA_DelCoinstallers [VIA3076.ndi.Coinstallers] DelReg=VIA_DelCoinstallers [VIA_CopyFiles] ; ; This section lists the source and destination names of files that need ; to be copied to the user's drive. The destination directory is given ; in the [DestinationDirs] section above. ; viairda.sys,,,2 [VIA_AddReg] ;HKR,NDI\Install,,0,VIAIRDA.Install ; Interfaces HKR, Ndi, Service, 0, "VIAIRDA" HKR, , BusType, 0, "14" HKR,NDI\Interfaces,DefUpper,0,ndisirda HKR,NDI\Interfaces,UpperRange,0,ndisirda HKR,Ndi\Interfaces, DefLower, 0,nolower HKR,Ndi\Interfaces, LowerRange, 0,nolower HKR,Ndi,RequiredAll,0,"MS_IrDA" [IR3058_AddReg] HKR, , BoardType, 0, "0" HKR,NDI\params\Dongle,default,,"2" HKR,NDI\params\MaxConnectRate,default,,"4000000" [IR3076_AddReg] HKR, , BoardType, 0, "0" HKR,NDI\params\Dongle,default,,"2" HKR,NDI\params\MaxConnectRate,default,,"4000000" [Dongle_Addreg] ; ; These entries allow the user to select the Configuration Register ; dialog box AFTER INSTALLATION (under the 'Advanced' options). ; The user's selection is recorded in the registry and then read out ; by the nscirda.sys driver at boot time. ; HKR,NDI\params\Dongle,ParamDesc,,%Dongle% HKR,NDI\params\Dongle,flag,1,20,00,00,00 ;HKR,NDI\params\Dongle,default,,"2" HKR,NDI\params\Dongle,type,,enum HKR,NDI\params\Dongle\enum,"1",,%DongleType_1% HKR,NDI\params\Dongle\enum,"2",,%DongleType_2% HKR,NDI\params\Dongle\enum,"3",,%DongleType_3% [MAXSPEED_AddReg] ;These entries allow the user to select the Max speed which the device ;will support. The user's selection is recorded in the registry and then ;read out by the viairda.sys driver at boot time. HKR,NDI\params\MaxConnectRate,ParamDesc,,"MaxConnectRate" HKR,NDI\params\MaxConnectRate,type,,enum HKR,NDI\params\MaxConnectRate\enum,"4000000",,"4,000,000 bps" HKR,NDI\params\MaxConnectRate\enum,"1152000",,"1,152,000 bps" HKR,NDI\params\MaxConnectRate\enum,"115200",, " 115,200 bps" HKR,NDI\params\MaxConnectRate\enum,"57600",, " 57,600 bps" HKR,NDI\params\MaxConnectRate\enum,"38400",, " 38,400 bps" HKR,NDI\params\MaxConnectRate\enum,"19200",, " 19,200 bps" HKR,NDI\params\MaxConnectRate\enum,"9600",, " 9,600 bps" [VIA_DelReg] HKR,,EnumPropPages32 [VIA_DelCoinstallers] HKR,,CoInstallers32 [Help_Addreg] HKR,NDI,HelpText,0,%IRMINI_HELP% [VIAIRDA.AddService] DisplayName = %VIAIRDA.ServiceDesc% ServiceType = 1 ; %SERVICE_KERNEL_DRIVER% StartType = 3 ; %SERVICE_DEMAND_START% ErrorControl = 1 ; %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\viairda.sys ;12=drivers directory LoadOrderGroup = NDIS [common.EventLog] AddReg = common.AddEventLog.reg [common.AddEventLog.reg] HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll" HKR, , TypesSupported, 0x00010001, 7 [Strings] ; ; This section defines symbolic string constants for use in the rest ; of the .inf script. You should create and use symbols for all ; translatable strings in order to make localization easier. ; Also, spaces within strings elsewhere in the script confuse infedit.exe; ; so use symbolic constants for any multi-word strings. ; IRMINI_HELP="The IrDA infrared port. It can be used to establish wireless serial and network links to other computers." VIAIRDA.ServiceDesc="VIA Infrared Device Driver" VIA3058.DeviceDesc="VIA Fast Infrared Controller" VIA3076.DeviceDesc="VIA Fast Infrared Controller" V_CLASSNAME="Infrared adapters" VIA="VIA Technologies, Inc." Dongle="Infrared Transceiver" DongleType_1="HP HSDL-1100" DongleType_2="IBM 31T1100" DongleType_3="HP HSDL-3600" DiskDescription = ""Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.