Readme.txt Driver File Contents (TouchPanel.zip)

****************************************************************************

     README.TXT for Touch Panel Driver Version 1.0L19  Windows2000/XP

     Copyright(C) 2001 Fujitsu Component Ltd.  All rights reserved.

****************************************************************************

Index:
  1. Driver installation process
   1.1 Touch panel controller connection
   1.2 Driver installation

  2. Driver uninstall process


----------------------------------------------------------------------------

 
1. Driver Installation process

 1.1 Touch panel controller connection
   Power off the PC system and connect touch panel controller interface to the
   serial port of the system and ensure power is applied to the controller
   board. Then power on the PC system.

 1.2 Driver installation
   (1) When PC starts, "New Hardware Wizard" runs automatically. 
   (2) Click "Next>" button.
   (3) Select "Search for a suitable driver for my device.(recommended)". And Click "Next>" button.
   (4) This floppy disk is put in 3.5 inches FD (A:).
   (5) The check is put on "Floppy disk drives". And Click "Next>" button.
   (6) The check is put on "Install one of the other drivers". And Click "Next>" button.
   (7) Select "Fujitsu Takamisawa Touch Panel driver (Windows2000/XP)". And Click "Next>" button.
   (8) Click "Yes" button.
   (9) Click "Finish" button.

   Attention:
    * You must have Administrator's authority to install this driver.
    * if "New Hardware Wizard" does not run, touch panel device was installed as "Standard Serial Mouse".
      In the case, please install as follows.
       (1) Run the "Fidinst.exe" file.
       (2) Click "OK" button.
       (3) Click "Yes" button.
       (4) Click "OK" button.

2. Driver uninstall process
   (1) Open "Control Panel" of the system.
   (2) Double click "Add/Remove Programs" icon.
   (3) Select "Fujitsu Takamisawa Touch Panel driver (Windows2000/XP)".
   (4) Click "Change/Remove" button.
   (5) Click "OK" button at delete confirmation dialog box.
   (6) Driver uninstall process finishes successfully.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.61