Release Notes.txt Driver File Contents (TV_drivers.zip)

Note: Under Windows98 the registry entries cannot support
HKR, "Key Name", "SubKey",0x00010001,0xC0 instead the entry must have the
following format:
HKR, "Key Name", "SubKey",0x00010001,0xC0,0x00,0x00,0x00
Version 2.4.0.6  12/08/2004
====================================================
WDM: - Support selectable audio source  
INF: - Add new model (SSID 8170)

Version 2.4.0.5  10/13/2004
====================================================
WDM & HAL: - 
	- Support Japan FM frequency (76000000 ~ 90000000) for IVI Hometheater

Version 2.4.0.4  10/12/2004
====================================================
WDM & HAL: - 
        - Bugfix for system reboot while running FM AutoScan in Power cinema  (NECCI)
	- Bugfix for No Sound in FM RADIO part of power cinema.
        - Bugfix for TV autoscan is too sensible in Power cinema  (NECCI)
	- Bugfix for the PC Hangs in Movie maker2 (SP1 or SP2) + COOPER Motherboard from ASUS while choosing TV Tuner card for capture.
     
     
Version 2.4.0.3  09/27/2004
====================================================
WDM: - Bugfix for S3/S4 issue (NECCI)
     - Modified without force blanking 

HAL: Based on BDA driver V1.3.1.15a
     - Bugfix for the audio detection in combination
       with the silicon tuner

SAA713x Release Notes (Version 2.4.0.2  09/16/2004 )
====================================================
WDM: - Bugfix for VBI under Windows98

HAL: Based on BDA driver V1.3.1.15a
     - Bugfix for the audio detection in combination
       with the silicon tuner

Version 2.4.0.1  08/17/2004
====================================================
WDM: - Bugfix for VBI and transport stream system crashes
     - Added WSS format (PAL) to VBI stream

TUNER: Improved silicon tuner channel scan (TV/FM)

HAL: Based on BDA driver V1.3.1.14


Version 2.4.0.0  07/08/2004
====================================================
WDM: - Changed property order of the driver to avoid
       AmCap crash
	 - Added YUY2 interlaced format

HAL: - Video standard detection back to AUTO mode
     - Fixed splitted video stream due to different
	   pitch size
	 - Bugfix of the board configuration via the INF file,
	   additional data will be taken into account
     - Improved the GPIO access
     - Improved the interrupt handling
     - Updated silicon tuner regarding PAL N Combo.
     - Support EIAJ audio switching (SW workaround for Saa7133 
	   with Revision ID <0xad1021, for >=0xad1021 HW fix is valid)     
	   
Version 2.3.4.5  09/02/2004 
====================================================
09/02 20:58
WDM: - Correcting FM Frequency issue. (HP)

Version 2.3.4.4  08/26/2004 
====================================================
08/26 16:42
WDM: - Soloving HCT DirectSound Capture Driver Test - (CreateCaptureBuffer on ADPCM failed) issue.

Version 2.3.4.3  08/10/2004 
====================================================
08/10 20:42
WDM: - Soloving Audio & Video Aync. issus in cyberlink Power Cinama.

Version 2.3.4.2  06/05/2004 
====================================================
06/05 14:18
WDM: - To solve the "disabling audio codec in the device manager, the system reboot"Issue.
     - Changed property order of the driver to avoid AmCap crash

06/05 13:48
HAL: - Video standard detection back to AUTO mode for solving Secam_L issue
     - Fixed splitted video stream due to different
	   pitch size


Version 2.3.4.1  03/23/2004
====================================================
03/23 20:30
Disable PCI Audio Capture 

03/17 16:48
Modified PAL_BG and PAL_DK issue

03/17 12:54
integrated standard PCI with mini-PCI driver
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 2.01