1. motorola56k.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (motorola56k.zip)

------------------------------------------------------
WINDOWS NT 3.51 MODEM INSTALLATION PROCEDURE AND NOTES
------------------------------------------------------

Please refer to the Motorola modem Web site for updated
drivers for Windows NT 3.51. The URL is http://www.mot.com/modems

Note:	You must exit the Motorola CD-ROM application before 
	following this procedure.

The following procedure should be used when installing your
Motorola 56K modem on Windows NT 3.51:


1) From the folder "\NT351" on your CD, run "setup.exe". This
   program copies the plug and play software to your computer.

2) Restart your computer. As the computer starts, the modem
   device driver is started.

3) Run "Motorola Pnp Setup for NT 3.51" from the Motorola program 
   group. Record the IRQ and I/O address information that you chose
   for step 6.

4) Open up the Main Program Group and double click Control Panel.

5) Double click Ports and then choose Add.

6) Add a communication port with the free IRQ and I/O address that you
   recorded in step 3. Check "FIFO Enabled". Click OK to accept the 
   new port settings.

7) Choose Restart Now to restart your computer.

8) After Windows NT 3.51 starts, wait for a beep (or about 40 seconds)
   for the modem to be ready.