[version] $Revision: 1.5 $ $Date: 17 Oct 1996 16:58:50 $ [setup] plottername=Anagraph Express Plotters (HPGL) page=1010100,13847,1000 *****PageX,PageY,Resolution notes=When plotting for the first time after a plotter power down select one of the (initialize) tools in the Cut/Plot menu in order to initialze the plotter correctly. Otherwise, the plotter will not plot. cut=0,0,0,0,0,0,1,0,0,0,1,369,372,0,3,0,0,0,0,0,10,0,0 tile=0,0,0,0,0,0,0,0 move1=91,130,30,18,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 move2=91,130,30,18,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 move3=91,130,30,18,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 move4=91,130,30,18,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 moveLimit1=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 moveLimit2=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 MaxVector=1000000 generic=1 XYMoveAbs=1 ArcAbs=1 ArcSupport=0 SendInitBefore=1 setupplot=307,536 [MoveControl] Variables=3 V1=Velocity,cm/s,0,91,VS%d V2=Pressure,grams,50,400,TP%d V3=Angle Offset,degrees,0,90,AO%d V4=Tool Offset,units,0,500,TO%d [Interrogation] Factors=OF;,200,20,13,%ld,%ld HardClip=OH;,500,30,13,%*ld,%*ld,%ld,%ld Digitize=DP; CurrentPos=OD;DC;,200,30,13,%ld,%ld,%*ld ;PlotterID=OI;,200,50,13,%Fs [Generic] AbsMove=PA RelMove=PR MoveUp=PU%.0lf,%.0lf MoveDn=PD%.0lf,%.0lf AbsArc=AA%.0lf,%.0lf,%.2lf RelArc=AR%.0lf,%.0lf,%.2lf Pause=NR EndJob= StartJob=RS39.37 ;RS=Resolution 39.37, 100, 236.22, 393.7 (steps/mm) default=39.37 Term=;\r\n [Tool1] ToolInit=IN;SP0 ToolEnd= [Tool2] ToolInit=IN;SP1 ToolEnd= Variables=2 [TOOLS] Number Of Tools=2 Tool 1 Name=Knife Tool 1 Type=1 Tool 2 Name=Pen Tool 2 Type=0 [Resolution] ;Low=1 ;Med=5 ;High=25 ;CutResBase=.0254 ;ArcFitRes=.0254 [Port Setup] commset=9600,n,8,1,p ;TXThreshold=10000 ;TransmitBufSize=10000 ;ReceiveBufSize=1024 ;handshaking=0,0,0,0,0,0,0,1,1,17,19,100,900,0,0 ;ReportError=0xFFFF Port=1 Spool=0 Use DOS Device=0 [notes] The plotter performs a service loop when an IN is received. This can be annoying and is not necessary between jobs, but only necessary after the plotter is first powered up.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.