======================================= 730DC FB TWAIN Driver Ver.3.10BH ======================================= Updated: August 2001 Welcome to 730DC FB TWAIN Driver. This document file contains information about 32-bit TWAIN driver. Please refer to this document when you use the driver. ------------------------------------------------------------------- Limitation and Warning. ------------------------------------------------------------------- * This driver is not available under Windows3.1. * Duplex scanning is available only under the application that supports the continue scanning. When you use the application which does not support the continue scanning, even if you select "Duplex", only one front page will be scanned. * It is necessary to install STI driver under Windows98 series, WindowsMe, or Windows2000. -- When you use the SCSI or IEEE1394 to connect to the scanner. * If the STI driver has been installed already under Windows98 series or WindowsMe, select the scanner device from: My computer/ properties / device manager, and renew the driver on properties. * If the STI driver has been installed already under Windows2000, select the scanner device from: My computer/ properties / hardware / device manager, and renew the driver on properties. * Even if ADF duplex scanning is selected, only the front page is scanned as Preview image. * The error message and the driver dialog sometimes appear behind the window and you can not handle the application or the dialog. In this case, select the "730DC FB TWAIN Driver Ver.3" on the task bar or press Alt+Tab key to call the dialog or message. * When you run Windows95 connecting with the scanner, "New Hardware Found" dialog which device name is "Unknown Device" appears. In that case, select "Do not install a driver (Windows will not prompt you again)" and press "OK" button. And then, "New Hardware Found" dialog will not appear at next start-up. -- When you use the SCSI to connect to the scanner. * Under Caere Corp. OmniPage, scanning with Gray Scale in Colors/Gradations setting sometimes causes PC hung up. * This driver does not support "Imaging", that is an accessory for Windows 95. * If the scanned image has uneven density when scanning the original that is uniform in density, remove the check of "Erase Background" feature in "Advanced" dialog. * When scanning continuously on Office2000, Deskew should be set to Off. * When scanning on Office2000, "Custom Insert" button should be selected. * If your scanner disappears from Device Manager after installing STI driver, please reboot Windows. * Size Auto Detection does not work correctly, if you set the original and close ADF before turning on the scanner power. Set the original after turning On the power and initialization has been completed. * Generally,the position where the endorser text is displayed is measured from the upper left of scanning area. If "Auto detection"setting is selected as document size,however, it is measured from the upper left of maximum scanning area. Therefore,scanned image may not contain all of endorser text.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.