; QSERBRD.INF ; Windows 2000/XP ; Main installation file for Quatech multiport serial devices ; Copyright (c) 2000-2005 Quatech, Incorporated ; Version 1.75 [Version] Signature="$WINDOWS NT$" Class=MultiPortSerial ClassGuid={50906CB8-BA12-11D1-BF5D-0000F805F530} Provider=%Quatech% DriverVer=04/13/2005,1.75 CatalogFile=qserbrd.cat ;------------------------------------------------------------------------ ;Windows 2000 --- DLLs go to the system directory (11). ; Drivers go to the system32\drivers directory (12). [DestinationDirs] DefaultDestDir = 12 DriverFiles = 12 DLLFiles2K = 11 CoCopyINF.CopyFiles = 11 ;------------------------------------------------------------------------ ;Uncomment the following section if the MultiPortSerial class for some reason ;does not exist on your machine ;[ClassInstall32.NT] ;AddReg=Multiboard.AddReg ;[Multiboard.NT.AddReg] ;HKR,,,,%MultiboardName% ;HKR,,Icon,,"-26" ;------------------------------------------------------------------------ ; Manufacturer Section [Manufacturer] %Quatech%=Quatech ; Models section [Quatech] ;PCI %QSC100.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0010&SUBSYS_0010135C %DSC100.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0020&SUBSYS_0020135C %DSC200.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0030&SUBSYS_0030135C %QSC200.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0040&SUBSYS_0040135C %ESC100.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0050&SUBSYS_0050135C %ESC100.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0060&SUBSYS_0060135C ;Compact PCI %QSCP100.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0120&SUBSYS_0120135C %DSCP100.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0130&SUBSYS_0130135C %QSCP200.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0140&SUBSYS_0140135C %DSCP200.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0150&SUBSYS_0150135C ;PCI Low-Profile %ESCLP100.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_01E0&SUBSYS_01E0135C %QSCLP100.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0170&SUBSYS_0170135C %DSCLP100.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0180&SUBSYS_0180135C %SSCLP100.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_0190&SUBSYS_0190135C %QSCLP200.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_01A0&SUBSYS_01A0135C %DSCLP200.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_01B0&SUBSYS_01B0135C %SSCLP200.DeviceDesc%=Multiport, PCI\VEN_135C&DEV_01C0&SUBSYS_01C0135C ;PCMCIA %SSP100.DeviceDesc%=PCMCIAMultiport1, PCMCIA\Quatech_Inc-0137-0001 %SSP200.DeviceDesc%=PCMCIAMultiport1, PCMCIA\Quatech_Inc-0137-0002 %DSP100.DeviceDesc%=PCMCIAMultiport2, PCMCIA\Quatech_Inc-0137-0007 %DSP200.DeviceDesc%=PCMCIAMultiport2, PCMCIA\Quatech_Inc-0137-000E %QSP100.DeviceDesc%=PCMCIAMultiport4, PCMCIA\Quatech_Inc-0137-001B %QSP200.DeviceDesc%=PCMCIAMultiport4, PCMCIA\Quatech_Inc-0137-0045 %SSP100G.DeviceDesc%=PCMCIAMultiport1, PCMCIA\Quatech_Inc-0137-004b %SSP200G.DeviceDesc%=PCMCIAMultiport1, PCMCIA\Quatech_Inc-0137-004c %DSP100G.DeviceDesc%=PCMCIAMultiport2, PCMCIA\Quatech_Inc-0137-004d %DSP200G.DeviceDesc%=PCMCIAMultiport2, PCMCIA\Quatech_Inc-0137-004e ;------------------------------------------------------------------------ [ControlFlags] ExcludeFromSelect=PCI\VEN_135C&DEV_0010&SUBSYS_0010135C ExcludeFromSelect=PCI\VEN_135C&DEV_0020&SUBSYS_0020135C ExcludeFromSelect=PCI\VEN_135C&DEV_0030&SUBSYS_0030135C ExcludeFromSelect=PCI\VEN_135C&DEV_0040&SUBSYS_0040135C ExcludeFromSelect=PCI\VEN_135C&DEV_0050&SUBSYS_0050135C ExcludeFromSelect=PCI\VEN_135C&DEV_0060&SUBSYS_0060135C ExcludeFromSelect=PCI\VEN_135C&DEV_0120&SUBSYS_0120135C ExcludeFromSelect=PCI\VEN_135C&DEV_0130&SUBSYS_0130135C ExcludeFromSelect=PCI\VEN_135C&DEV_0140&SUBSYS_0140135C ExcludeFromSelect=PCI\VEN_135C&DEV_0150&SUBSYS_0150135C ExcludeFromSelect=PCI\VEN_135C&DEV_0170&SUBSYS_0170135C ExcludeFromSelect=PCI\VEN_135C&DEV_0180&SUBSYS_0180135C ExcludeFromSelect=PCI\VEN_135C&DEV_0190&SUBSYS_0190135C ExcludeFromSelect=PCI\VEN_135C&DEV_01A0&SUBSYS_01A0135C ExcludeFromSelect=PCI\VEN_135C&DEV_01B0&SUBSYS_01B0135C ExcludeFromSelect=PCI\VEN_135C&DEV_01C0&SUBSYS_01C0135C ExcludeFromSelect=PCI\VEN_135C&DEV_01E0&SUBSYS_01E0135C ExcludeFromSelect=PCMCIA\Quatech_Inc-0137-0001 ExcludeFromSelect=PCMCIA\Quatech_Inc-0137-0002 ExcludeFromSelect=PCMCIA\Quatech_Inc-0137-0007 ExcludeFromSelect=PCMCIA\Quatech_Inc-0137-000E ExcludeFromSelect=PCMCIA\Quatech_Inc-0137-001B ExcludeFromSelect=PCMCIA\Quatech_Inc-0137-0045 ExcludeFromSelect=PCMCIA\Quatech_Inc-0137-004b ExcludeFromSelect=PCMCIA\Quatech_Inc-0137-004c ExcludeFromSelect=PCMCIA\Quatech_Inc-0137-004d ExcludeFromSelect=PCMCIA\Quatech_Inc-0137-004e ;------------------------------------------------------------------------ ; Disks and files sections ; [SourceDisksNames] 1 = %DiskName%,,,"" [SourceDisksFiles] ; Files for Quatech Multiport Serial Driver Installation Disk qserbus.sys = 1,, qtwdmlib.sys = 1,, QtPPages.dll = 1,, qtserial.sys = 1,, cocpyinf.dll = 1,, [DriverFiles] qserbus.sys qtwdmlib.sys qtserial.sys ;serenum.sys ;should already be present on system [DLLFiles2K] QtPPages.dll ;------------------------------------------------------------------------ ; CopyINF DLL coinstaller section - needed for Win2000 support of CopyINF. ; [CoCopyINF.AddReg] HKR,,CoInstallers32,0x10000,"cocpyinf.DLL,CoCopyINF" [CoCopyINF.CopyFiles] cocpyinf.dll,,,0x10 ;------------------------------------------------------------------------ ; PCI MultiPort board install section ; [Multiport.NT] CopyFiles=DriverFiles,DLLFiles2K AddReg=QtPPagesAddReg CopyInf = QSERPT.INF [Multiport.NT.CoInstallers] AddReg = CoCopyINF.AddReg CopyFiles= CoCopyINF.CopyFiles ;------------------------------------------------------------------------ ; PCMCIA MultiPort board install section ; [PCMCIAMultiport1.NT] CopyFiles=DriverFiles,DLLFiles2K AddReg=QtPPagesAddReg CopyInf = QSERPT.INF [PCMCIAMultiport1.NT.CoInstallers] AddReg = CoCopyINF.AddReg CopyFiles= CoCopyINF.CopyFiles [PCMCIAMultiport2.NT] CopyFiles=DriverFiles,DLLFiles2K AddReg=QtPPagesAddReg CopyInf = QSERPT.INF [PCMCIAMultiport2.NT.CoInstallers] AddReg = CoCopyINF.AddReg CopyFiles= CoCopyINF.CopyFiles [PCMCIAMultiport4.NT] CopyFiles=DriverFiles,DLLFiles2K AddReg=QtPPagesAddReg CopyInf = QSERPT.INF [PCMCIAMultiport4.NT.CoInstallers] AddReg = CoCopyINF.AddReg CopyFiles= CoCopyINF.CopyFiles ;------------------------------------------------------------------------ ; PCMCIA MultiPort board override sections ; These were added to compensate for a bug in certain laptops (rhymes with Hell) without a built-in COM1. ; [PCMCIAMultiport1.NT.LogConfigOverride] LogConfig=PCMCIAMultiport1.Override0,PCMCIAMultiport1.Override1,PCMCIAMultiport1.Override2,PCMCIAMultiport1.Override3,PCMCIAMultiport1.Override4 [PCMCIAMultiport2.NT.LogConfigOverride] LogConfig=PCMCIAMultiport2.Override0,PCMCIAMultiport2.Override1,PCMCIAMultiport2.Override2,PCMCIAMultiport2.Override3,PCMCIAMultiport2.Override4 [PCMCIAMultiport1.Override0] ConfigPriority=NORMAL IOConfig=8@400-ffff%fff8 IRQConfig=2,3,4,5,6,7,10,11,12,14,15 PcCardConfig=41 [PCMCIAMultiport1.Override1] ConfigPriority=NORMAL IOConfig=2e8-2ef(3ff::) IRQConfig=4,2,3,5,6,7,10,11,12,14,15 PcCardConfig=41 [PCMCIAMultiport1.Override2] ConfigPriority=NORMAL IOConfig=3e8-3ef(3ff::) IRQConfig=3,2,4,5,6,7,10,11,12,14,15 PcCardConfig=41 [PCMCIAMultiport1.Override3] ConfigPriority=NORMAL IOConfig=2f8-2ff(3ff::) IRQConfig=4,2,3,5,6,7,10,11,12,14,15 PcCardConfig=41 [PCMCIAMultiport1.Override4] ConfigPriority=NORMAL IOConfig=3f8-3ff(3ff::) IRQConfig=4,2,3,5,6,7,10,11,12,14,15 PcCardConfig=41 [PCMCIAMultiport2.Override0] ConfigPriority=NORMAL IOConfig=10@400-ffff%fff0 IRQConfig=2,3,4,5,6,7,10,11,12,14,15 PcCardConfig=41 [PCMCIAMultiport2.Override1] ConfigPriority=NORMAL IOConfig=2e0-2ef(3ff::) IRQConfig=4,2,3,5,6,7,10,11,12,14,15 PcCardConfig=41 [PCMCIAMultiport2.Override2] ConfigPriority=NORMAL IOConfig=3e0-3ef(3ff::) IRQConfig=3,2,4,5,6,7,10,11,12,14,15 PcCardConfig=41 [PCMCIAMultiport2.Override3] ConfigPriority=NORMAL IOConfig=2f0-2ff(3ff::) IRQConfig=4,2,3,5,6,7,10,11,12,14,15 PcCardConfig=41 [PCMCIAMultiport2.Override4] ConfigPriority=NORMAL IOConfig=3f0-3ff(3ff::) IRQConfig=4,2,3,5,6,7,10,11,12,14,15 PcCardConfig=41 ;------------------------------------------------------------------------ ; PCI/PCMCIA MultiPort board properties pages section ; [QtPPagesAddReg] HKR,,EnumPropPages32,,"QtPPages.dll,EnumPropPages" ;------------------------------------------------------------------------ ; PCI Services Section ; [Multiport.NT.Services] AddService=QSerBus, 0x00000002, BusService ;------------------------------------------------------------------------ ; PCMCIA Services Section (identical to that for PCI) ; [PCMCIAMultiport1.NT.Services] AddService=QSerBus, 0x00000002, BusService [PCMCIAMultiport2.NT.Services] AddService=QSerBus, 0x00000002, BusService [PCMCIAMultiport4.NT.Services] AddService=QSerBus, 0x00000002, BusService [BusService] DisplayName = %ServiceDesc% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\qserbus.sys ;------------------------------------------------------------------------ ; Strings Section ; [Strings] Quatech = "Quatech, Incorporated" DiskName = "Quatech Multiport Serial Driver Installation Disk" ServiceDesc = "Quatech PCI/PCMCIA/ISA Multiport Serial Device Enumerator" MultiboardName = "Multi-port serial adapters" DSC100.DeviceDesc = "Quatech DSC-100 PCI Two-Port RS-232 Serial Adapter" DSC200.DeviceDesc = "Quatech DSC-200/300 PCI Two-Port RS-422/485 Serial Adapter" QSC100.DeviceDesc = "Quatech QSC-100 PCI Four-Port RS-232 Serial Adapter" QSC200.DeviceDesc = "Quatech QSC-200/300 PCI Four-Port RS-422/485 Serial Adapter" ESC100.DeviceDesc = "Quatech ESC-100 PCI Eight-Port RS-232 Serial Adapter" DSCP100.DeviceDesc = "Quatech DSCP-100 Compact PCI Two-Port RS-232 Serial Adapter" QSCP100.DeviceDesc = "Quatech QSCP-100 Compact PCI Four-Port RS-232 Serial Adapter" DSCP200.DeviceDesc = "Quatech DSCP-200/300 Compact PCI Two-Port RS-422/485 Serial Adapter" QSCP200.DeviceDesc = "Quatech QSCP-200/300 Compact PCI Four-Port RS-422/485 Serial Adapter" SSCLP100.DeviceDesc = "Quatech SSCLP-100 Low-Profile PCI One-Port RS-232 Serial Adapter" SSCLP200.DeviceDesc = "Quatech SSCLP-200/300 Low-Profile PCI One-Port RS-422/485 Serial Adapter" DSCLP100.DeviceDesc = "Quatech DSCLP-100 Low-Profile PCI Two-Port RS-232 Serial Adapter" DSCLP200.DeviceDesc = "Quatech DSCLP-200/300 Low-Profile PCI Two-Port RS-422/485 Serial Adapter" QSCLP100.DeviceDesc = "Quatech QSCLP-100 Low-Profile PCI Four-Port RS-232 Serial Adapter" QSCLP200.DeviceDesc = "Quatech QSCLP-200/300 Low-Profile PCI Four-Port RS-422/485 Serial Adapter" ESCLP100.DeviceDesc = "Quatech ESCLP-100 Low-Profile PCI Eight-Port RS-232 Serial Adapter" SSP100.DeviceDesc = "Quatech SSP-100 PCMCIA RS-232 Serial Adapter" SSP200.DeviceDesc = "Quatech SSP-200/300 PCMCIA RS-422/485 Serial Adapter" DSP100.DeviceDesc = "Quatech DSP-100 PCMCIA Two-Port RS-232 Serial Adapter" DSP200.DeviceDesc = "Quatech DSP-200/300 PCMCIA Two-Port RS-422/485 Serial Adapter" DSP200G.DeviceDesc = "Quatech DSP-200/300 PCMCIA Two-Port RS-422/485 Serial Adapter" QSP100.DeviceDesc = "Quatech QSP-100 PCMCIA Four-Port RS-232 Serial Adapter" QSP200.DeviceDesc = "Quatech QSP-200/300 PCMCIA Four-Port RS-422/485 Serial Adapter" SSP100G.DeviceDesc = "Quatech SSP-100 PCMCIA RS-232 Serial Adapter" SSP200G.DeviceDesc = "Quatech SSP-200/300 PCMCIA RS-422/485 Serial Adapter" DSP100G.DeviceDesc = "Quatech DSP-100 PCMCIA Two-Port RS-232 Serial Adapter" .Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.