4S4EB0X1.86A Standard BIOS Production Release 12, Build 0032
About This Release
- 4S4EB0X1.86A.0032.P12 (Production 12)
- No on Board Video.
Features/Errata Fixed In This Release
Prod-0012
- Fixed ATAPI ID string repeated during POST
- Added feature where both Floppy A: and B: SETUP nodes will appear if the on-board floppy
controller is DISABLED and an add-in floppy controller is installed.
Prod-0011
- Added support for Intel(R) Pentium(R) III processor at 450MHz.
- Added check to not allow Intel(R) Pentium(R) III processor at 500Mhz operation.
- Added BIOS Setup option for Intel(R) Pentium(R) III Processor Serial Number Enable/Disable
- Updated copyright notice.
- Added feature for PCI IRQ limiting.
- Removed Ctl+Alt+L hotkey combination.
- Fixed issue with internal modem disconnect or not responding.
- Fixed the issue with system not displaying video with PCI video card behind a DEC bridge.
- Fixed a issue where resource conflict errors were not captured in the DMI event log.
- Fixed invalid information reported by LDCM.
- Added fix for system not hanging after multi-bit ECC Error.
- Fixed Language translation for DMI strings in setup.
- Fixed DMI storage structure size from get DMI/SMBIOS information.
- Fixed DMI event logging: logging error when keyboard not functional.
- Fixed issue where floppy write protect was accessible even with VIEW ONLY.
- Fixed issue with 5-1/4" floppy drive not be recognized.
- Corrected keyboard issues with NUM LOCK, CAPS LOCK and SHIFT Lock.
- Corrected issue with certain keyboards and keyboard mapping combinations.
- Fixed issue with certain USB IR transceivers.
- Fixed issue with Monitors with USB hubs.
- Fixed issue with SHIFT TAB not working in DOS programs.
Prod-0010
- QuietBoot screen is disabled if a small OEM logo is displayed.
- Fixed hang when Himem.sys was not loaded and an attempt to read from CPU update area was made.
- Fixed password error message display with QuietBoot enabled.
- Fixed issue with PC97 R7.6 APM.
- Fixed issue with PC97 R7.6 ACPI.
- Fixed issue with displaying of CPU strings.
Prod-0009
- COM A will be enabled if PNP OS is set to "Yes".
- Fix for system not hanging after Multi-Bit ECC error.
- Fix for APM 1.2 issue due to RTC Wake Alarm waking system up immediately.
- Added Pentium(R) II processor 450 MHz support.
- Fixed issue with SHIFT TAB not working in DOS programs.
- Fixed issue with booting from ISA Video Card when Scan User Flash Area is enabled in BIOS Setup.
- Enhanced security in SMBIOS 2.1 code.
Prod-0008
- Fixed issue with boot delay at post code 38.
- Updated DIMM timing algorithm.
- Fixed issue with non-VESA compatible video cards in QuietBoot.
Prod-0007
- Modified BIOS to try to use non-SPD, unprogrammed SPD and improperly programmed SPD DIMMs and to issue a new new warning message on first detecting these devices.
- Fixed problem with loading a user logo.
- Fixed VESA power down Setup option to work correctly.
- Added Pentium(R) II processor UPDATE Stepping A
- Changed to more efficient code compression algorithm.
- Added SMBIOS 2.1 handler to load UUID into Type 1 structure.
- Fixed issue where disabling the Parallel port in Setup would cause hang upon subsequent tries to enter Setup.
- Added setup option that allows an AGP card to be the boot device if a PCI VGA card is also installed.
- Fixed BIOS Setup fields to display OS CONTROLLED after device configuration was changed using the Windows- 95 Device Manager.
- Fixed issue where Audio Setup Node would not appear on subsequent boots if Audio had been disabled in Setup.
- Fixed issue where system would wake up from SUSPEND mode when RESUME on Ring is Disabled in Power Management.
- Fixed issue where Unattended Start would unlock itself.
- Updated Audio code to hide Audio Enable/Disable Setup if Audio is not stuffed.
- Added fix for USB speakers to work correctly.
- Added standard Intel QuietBoot support.
- Added "Boot-Time Diagnostic Screen" setup option to the Boot screen of setup.
- Added SMBIOS 2.1 support.
- Additional strings have been translated into foreign language.
- Updated 440BX chipset code in bootblok as well as in system code.
Prod-0004
- First Production Release of the SE440BX BIOS.
* Third-party trademarks are the property of their respective owners.
Copyright (c) 1998. Intel Corporation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.