¢¼ Caution: Samsung is not responsable for problems during the firmware upgrade. When you encounter problems during the upgrade, please contact a Samsung Service Center. If your drive is still in warranty please contact your retailer first. When you upgrade your firmware, please check the "Buyer" on your label of drive. If you upgrade wrong firmware, you will have a problem in operating. ex) SC-152G/*** 63BT123456 F/W=C400(***=Buyer) ¢À How to upgrade your firmware in Dos mode ¢À 1. Donwload firmware file to the Directory(C:) 2. Reboot your pc. 3. If you press F8 in Boot, Windows95/98 Start-up menu will be appeared. (In case of window me/2000 , They are not supported in Dos mode, please boot using booting disket/cd) If you see windiws95/98 start up menu, you can find "Dos prompt mode or Command prompt only". Then please choose this mode and boot in Dos mode. 4. If the booting is finished in Dos mode, please move to the Directory(c:)that you downloaded firmware file. (Write C:W>CD "DIRECTORY NAME" to move to Directory in Dos mode) 5. After moving to the Directory which contain firmware file, Please write C:W>sfdndosv.exe file name.bin and Run. 6. If only one drive is connected : press "Enter" after inputting "SFDNDOSV file name.Bin" If you set up your drive as Master : press"Enter" after inputting "SFDNDOSV file name.Bin SM " If you set up your drive as Slave : press "Enter" after inputting "SFDNDOSV file name. Bin SS" If you got the message"firmware upgrade is finished", power your pc off and reboot your pc. (Caution: when power the pc off, don't use Ctrl+Alt+Del or Reset)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.