[settings] ; NOTE: ONLY enable the keys below if you want to override the default values ; These are overridden at rip-time ; PAPER_TYPE ; Possible values: ; 0 = PlainPaper ; 1 = CoatedPaper ; 2 = PhotoPaper, ; 3 = Transparency ; 4 = IronOnPaper ; 5 = GreetingCardStock ; Driver default is 1 ; ;paper_type = 2 ; PREF_TYPE ; Possible values: ; 0 = Natual ; 1 = Vivid ; Driver default is 0 ; ;pref_type = 1 ; QUALITY_TYPE ; Possible Values ; 0 = Draft ; 1 = Normal ; 2 = High ; 3 = Maximum ; Driver default depends on the print quality mode ; ;quality_type = 3 ; UsePhotoTable ; Set to 1 (or remove) to use the photo table ; Set to 0 to NOT use the photo table ; Driver default is 1 ; ;UsePhotoTable = 1 ; Print Direction - use to override print direction in the driver ; possible values: ; 1 = LTOR, 2=RTOL, 3=BIDI, 4=CMYLTOR_MONORTOL, 5=CMYRTOL_MONOLTOR, 6=NO_DIRECTION ; Driver default is 3 if driver is set to Bidi printing; otherwise default is 5 ; Direction = 3 ;************************************************************************** ; Devmode Overrides ; These only override the initial default values ; Once the driver is initialized these values will then have no effect ; Cartridge Type default ; possible values: ; 0 = 1-Color; 1 = 3-Color; 2 = 4-Color; 3 = 6-Color ;CartridgeType = 1 ; Resolution default ; 0 = Normal 600; 1 = Best 600; 2 = Presentation 1200; 3 = Photo 2400; 4 = Ultra 4800 ;Resolution = 2 ; Saturation default ; 0 to 100 possible ;Saturation = 50 ; Inner Diameter default ; 0 to 500 possible (ie. 386 = 38.6mm) ;InnerDiameter = 386 ; Bidirectional printing default ; We will assume NOT bidirectional printing ; We can enable BIDI printing by setting Bidi=1 here Bidi = 1 ;******************************************************** ; These values are ADDED TO the default values ; This will affect the image placement at rip-time ; ; Fudge factor for Vertical offset (image placement) ; This value will be ADDED TO the default vertical offset (subtracted if negative) ; (300 dpi units) VerticalFudge = 10 ; Fudge factor for Horizontal offset (image placement) ; This value will be ADDED TO the default horizontal offset (subtracted if negative) ; (300 dpi units) HorizontalFudge = -3 ; Fudge factor for Vertical offset adjustment between Color and Black cartridge ; This value will be ADDED TO the default vertical color/black calibration value (subtracted if negative) ; (300 dpi units) ;VerticalBlackAdjust = 0 ; Fudge factor for Horizontal offset adjustment between Color and Black cartridge ; This value will be ADDED TO the default horizontal color/black calibration value (subtracted if negative) ; (300 dpi units) ;HorizontalBlackAdjust = 0 ; Fudge factor for Vertical offset adjustment between Color and Photo cartridge ; This value will be ADDED TO the default vertical color/photo calibration value (subtracted if negative) ; (300 dpi units) ;VerticalPhotoAdjust = 0 ; Fudge factor for Horizontal offset adjustment between Color and Photo cartridge ; This value will be ADDED TO the default horizontal color/photo calibration value (subtracted if negative) ; (300 dpi units) ;HorizontalPhotoAdjust = 0 ; Fudge factor for COLOR BIDI printing ; This value will be ADDED TO the default color bidi calibration value (subtracted if negative) ; (300 dpi units) ;ColorBidiAdjust = 0 ; Fudge factor for BLACK BIDI printing ; This value will be ADDED TO the default black bidi calibration value (subtracted if negative) ; (300 dpi units) ;BlackBidiAdjust = 0 ; Fudge factor for PHOTO BIDI printing ; This value will be ADDED TO the default PHOTO bidi calibration value (subtracted if negative) ; (300 dpi units) ;PhotoBidiAdjust = 0 ; Override for ink capacity values (in M) ;ColorSpits = 700 ;BlackSpits = 610 PhotoSpits = 335Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.