1. fp16-3.1.zip Driver
2. WIN95.TXT File Contents

WIN95.TXT Driver File Contents (fp16-3.1.zip)

               10/100M Fast Ethernet PCMCIA Adapter Installation
                         for Windows 95/Windows 95 OSR2


 1.0 Installation Notes For Windows 95 Users
 2.0 Installation Notes For Windows 95 OSR2 Users
 ________________________________________________


 1.0 Installation Notes For Windows 95 Users
 ___________________________________________


    1. We assume that the PCMCIA Chipset drivers are loaded and functioning.
       The "System" icon in the "Control Panel" window can report on its
       functionality. Any question on this layer need to be taken up with
       the machines manufacturer.

    2. After Windows 95 is fully functional and the PCMCIA Chipset drivers
       are working properly.
       You can install the "10/100M Fast Ethernet PCMCIA Adapter".

    3. Insert the "10/100M Fast Ethernet PCMCIA Adapter" into the PCMCIA Slot.

    4. After starting Windows 95, the "10/100M Fast Ethernet PCMCIA Adapter"
       will be detected automatically then the "New Hardware Found" window
       appears.

    5. Select "Have disk from Manufacture" when request a device driver.

    6. Insert the "10/100M Fast Ethernet PCMCIA Adapter" Installation diskette
       into drive A:.

    7. Type "A:\WIN95", then click the "OK" button.

    8. The driver will be installed and it may ask for the installation
       CD/disks. After the installation is complete, Windows 95 will reboot,
       and the card will be fully functional.


 2.0 Installation Notes For Windows 95 OSR2 Users
 ________________________________________________

    1. Start your PC, then insert the "10/100M Fast Ethernet PCMCIA Adapter"
       into an available PC Card slot in your PC.

    2. After starting Windows 95, the "10/100M Fast Ethernet PCMCIA Adapter"
       will be detected automatically, then the "Update Device Driver Wizard"
       window appears.

    3. Insert the "10/100M Fast Ethernet PCMCIA Adapter" Installation diskette
       into drive A:, then click the "Next" button.

    4. Windows 95 will start to search floppy drive A: for network driver.

    5. Click the "Other Locations..." button, then type "A:\WIN95" in the
       "Select Other Location" window and click the "OK" button.

    6. Click the "Finish" button, then click "OK" button in the "Insert Disk"
       window.

    7. Type "A:\WIN95" in the "Copying Files..." window, then click the
       "OK" button.

    8. The Windows 95 starts to copy the driver to the user's hard disk.

    9. Click the "Yes" button to restart your computer when the Windows 95
       has finished setting up your hardware.