1. fast_v-1.0.zip Driver
2. PACKET.TXT File Contents

PACKET.TXT Driver File Contents (fast_v-1.0.zip)

            VIA VT6105 Rhine III Fast Ethernet Adapter Installation
                               for Packet Driver

Introduction:
=============
  The Packet Driver for DOS workstations confirms to the PC/TCP version 1.09
  Packet driver specification.
  This document shows you how to setup the driver and how to use the enhanced
  functions by setting the custom keywords in configuration file.


Installation:
=============
  Before starting with the installation process, make sure that the adapter
  is properly installed and configured. You can use the diagnostic program
  to make sure your connection with the network is correct.

  Installation Packet Driver:
  ---------------------------
    1) Copy the Packet driver to your HardDisk, suppose you copy it to
       C:\PACKET directory.
       EX: copy  d:\pktdrv\fetpkt.com  c:\packet\fetpkt.com

    2) Add the following line to C:\AUTOEXEC.BAT
       C:\PACKET\FETPKT -n 0x60


Configuration Files:
====================
    (Suppose PACKET driver is copied to C:\PACKET directory)

    File Name: C:\AUTOEXEC.BAT
    --------------------------
        C:\PACKET\FETPKT -n -w 0x60
            0x60 is software vector number this driver uses.
            -n means Novell packets can be transmitted across this driver
            -w means Window compatible.

        If you want to link to N-way Device and use auto mode, you can add
        parameter as follow:
            C:\PACKET\FETPKT -a -n 0x60

        If you want to force assigning linespeed equal 100Mbs or 10Mbs,
        halfduplex or fullduplex, you can add parameter as follow:
            C:\PACKET\FETPKT -s100 -f -n 0x60  (speed=100Mbs fullduplex)
            C:\PACKET\FETPKT -s10 -h -n 0x60   (speed=10Mbs halfduplex)
            (suggest use CONNECTIONTYPE instead of this keyword)

        If you want to force assigning pci slot number you can add parameter
        as follow:
            C:\PACKET\FETPKT -l10 -n 0x60  (pci slot number=10)

        If you want to set up your connection type, you can add parameter
        as follow:
            C:\PACKET\FETPKT -connectiontype=autosense 0x60   (default)
            C:\PACKET\FETPKT -connectiontype=10baset 0x60     (10M_halfduplex)
            C:\PACKET\FETPKT -connectiontype=10basetfd 0x60   (10M_fullduplex)
            C:\PACKET\FETPKT -connectiontype=100basetx 0x60   (100M_halfduplex)
            C:\PACKET\FETPKT -connectiontype=100basetxfd 0x60 (100M_fullduplex)

        If you want to set up your flow control ability, you can add parameter
        as follow:
            C:\PACKET\FETPKT -flow_control=hardware_default 0x60 (default)
            C:\PACKET\FETPKT -flow_control=enable 0x60 (enable flow control)
            C:\PACKET\FETPKT -flow_control=disable 0x60 (disable flow control)