NSC DP83815 10/100Mbps MacPhyter3v PCI Adapter Installtion
for Windows ME
1.0 Installation Notes For Windows ME Users
2.0 Advanced Setup
___________________________________________________________________
1.0 Installation Notes For Windows ME Users
_________________________________________________________
1. Shutdown the computer and plug the "NSC DP83815 10/100Mbps MacPhyter3v
PCI Adapter" into the PCI slot.
2. After starting Windows 98, the windows will detect automatically
the new PCI Ethernet Controller, then the "Add New Hardware Wizard"
window appears.
3. Insert the "NSC DP83815 10/100Mbps MacPhyter3v PCI Adapter" installation
diskette into drive A:
4. Select the "Automatic search for a better driver(Recommended)",
radio button, then click the "Next" button.
5. The Windows ME will start to search A: drive for network driver.
6. Type A:\ and click "OK" button.
7. Windows starts to copy the "NSC DP83815 10/100Mbps MacPhyter3v PCI
Adapter" driver to the user's hard disk.
8. Click "Finish" button when windows has finished installing the new
hardware device.
9. Restart your computer.
2.0 Advanced Setup
__________________
When you need to change the speed and duplex for "NSC DP83815 10/100Mbps
MacPhyter3v PCI Adapter".
The following step will help you to finish the setting.
1. Click on "Control Panel", then click on "Network".
2. Click on the "National Semiconductor Corp. DP83815 10/100
MacPhyter3v PCI Adapter" selection.
Then, click on "Properties".
3. Choose "Advanced" page to setting "Network Media":
Auto Sense
100BaseTX
100BaseTX Full duplex
10BaseT
10BaseT Full duplex
Choose the setting as you needed.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.