NSC DP83815 10/100Mbps MacPhyter3v PCI Adapter Installtion
for Windows 2000
1.0 Installation Notes For Windows 2000 Users
2.0 Advanced Setup
___________________________________________________________________
1.0 Installation Notes For Windows 2000 Users
_________________________________________________________
1. Shutdown the computer and plug the "NSC DP83815 10/100Mbps MacPhyter3v
PCI Adapter" into the PCI slot.
2. After starting Windows 2000, the windows will detect automatically
the new PCI Ethernet Controller, then the "Found New Hardware Wizard"
window appears.
3. Insert the "NSC DP83815 10/100Mbps MacPhyter3v PCI Adapter" diskette
into drive A:, then click the "Next" button.
4. Select the "Search for a suitable driver for my device(recommended)",
radio button, then click the "Next" button.
5. Select the "Floppy disk drives" in Loacte Driver Files window,
then click the "Next" button.
6. Windows 2000 will start to search A: drive for network driver,
and found a driver for this device.
Click the "Next" button to install the driver.
7. Click the "Yes" button, when "Digital Signature Not Found" to
continue with the installation.
8. Windows 2000 will start to copy the "NSC DP83815 10/100Mbps MacPhyter3v
PCI Adapter" driver to the user's hard disk.
9. Click "Finish" button.
2.0 Advanced Setup
__________________
When you need to change the speed and duplex for "NSC DP83815 10/100Mbps
MacPhyter3v PCI Adapter".
The following step will help you to finish the setting.
1. Click on "Control Panel", then click on "System".
2. Choose "Hardware" page, then click on "Device Manage..."
3. Click on the "National Semiconductor Corp. DP83815 10/100
MacPhyter3v PCI Adapter" selection in "Network adapters"
4. Choose "Advanced" page to setting "Network Media":
Auto Sense
100BaseTX
100BaseTX Full duplex
10BaseT
10BaseT Full duplex
Choose the setting as you needed.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.