\HELP\WINNT.TXT
ALTIMA Gigabit Ethernet Adapter Installtion
for Windows NT4.0
Contents:
=========
1. Introduction
2. Getting Started
Introduction:
=============
Getting Started will describe the installation instructions.
Getting Started:
================
1. From the "My Computer" window, select "Control Panel" icon.
2. In the "Control Panel" window, select "Network" icon.
3. In the "Network", select "Adapters" page.
4. Click the "Add..." button, then Windows NT will display a list of all
available drivers.
5. Click teh "Have Disk..." button, for third-party adapters not included
in the list.
6. Insert the driver disk into floppy drive/CD-ROM drive, and then
type the following:
Ex. "A:\"
7. After Click the "OK" button, the Windows NT will attempt to locate
the OEMSETUP.INF file in the specified path.
8. The Windows NT will find the
"Altima 1001 Gigabit Ethernet (IntegratedCopper)" or
"Altima 1002 Gigabit Ethernet (IntegratedCopper)"
Click the "OK" button, the Windows NT starts to copy the appropriate
drivers to the user's hard disk.
9. The Windows NT will pop up with the Configure Network Adapter window.
You can change the "Connection Type" and "NetworkAddress" parameters,
then click the "OK" button.
For "Speed & Duplex":
Choose the "Auto" option. The driver will auto-detect the
media that is connecting to the adapter.
Other possible connection type selections are:
"10 Mb Half", "10 Mb Full", "100 Mb Half" and "100 Mb Full".
10. Click the "Close" button, the drivers are now properly installed.
The installation procedure will then proceed to the next steps.
Please refer to your Windows NT installation guide for information
on these steps.
11. After the initial installation, the drivers will be permanently
installed to the Windows NT system. Subsequent accesses to the
network driver list will include these drivers as options.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.